HDD GURU FORUMS
http://forum.hddguru.com/

PC3000 ProtableIII and PRO Dedicated NVME Adapter
http://forum.hddguru.com/viewtopic.php?f=15&t=45329		 Page 1 of 1
Author:  Flashguys [ May 14th, 2025, 22:22 ]
Post subject:  PC3000 ProtableIII and PRO Dedicated NVME Adapter
Application Scenario 1: For disks with a lot of black spots in the image, heat them up to 80-100 degrees after mirroring and replenish the part of the black block that has not been read out (this is effective for most SSD disks).
2: For some Protable III unsupported host controller, disk that can't load LDR virtual compiler, long busy SSD disk, heat the disk to 100 degrees first, about 30-40 minutes to refresh the ID or power off to refresh the ID. About 30% of the disks can be mirrored.
3: For SSDs with bad core power supply, you can fly a 1.0v, 1.2v, 1.8v cable to the hard disk.

Contact me if you are interested
Telegram:@L02233adapter

Attachments:
20250515102029.jpg
20250515102029.jpg [ 544.81 KiB | Viewed 3994 times ]
20250515102006.jpg
20250515102006.jpg [ 322.77 KiB | Viewed 3994 times ]
Author:  ccc [ May 15th, 2025, 1:16 ]
Post subject:  Re: PC3000 ProtableIII and PRO Dedicated NVME Adapter
What's the temperature range of the device....Also what's the safe max temperature to avoid burning the peltier element?
Author:  Flashguys [ May 15th, 2025, 1:23 ]
Post subject:  Re: PC3000 ProtableIII and PRO Dedicated NVME Adapter
The maximum temperature of the adapter is 110 degrees Celsius. After testing, the best effect is found at 70-100 degrees Celsius.
Author:  Flashguys [ June 5th, 2025, 4:23 ]
Post subject:  Re: PC3000 ProtableIII and PRO Dedicated NVME Adapter
For the full test video If interested please contact me on telegram（@L02233adapter）。

https://drive.google.com/file/d/1byqDNz-LxPHlpuv6bzJaS51SKM3hm9xn/view?usp=sharing
Author:  michael chiklis [ June 6th, 2025, 18:35 ]
Post subject:  Re: PC3000 ProtableIII and PRO Dedicated NVME Adapter
The funny thing is that this temperature control tool was probably developed by the MRT team, who are competitors of AceLab.
They have developed (or at least promote) a tool compatible with PC3000 from AceLab, the paradox is that MRT has not yet developed any data recovery tool for NVMe.
:lol:

It is interesting to know what does AceLab team think about this tool?
Do they agree? Coluld it cause some sort of damages to PC3000 Portable?
Author:  hvd [ July 5th, 2025, 5:53 ]
Post subject:  Re: PC3000 ProtableIII and PRO Dedicated NVME Adapter
Flashguys wrote:
For the full test video If interested please contact me on telegram（@L02233adapter）。

https://drive.google.com/file/d/1byqDNz-LxPHlpuv6bzJaS51SKM3hm9xn/view?usp=sharing


Hello

Do you have an email address or a Teams account ?

Thank you.
Author:  ccc [ September 3rd, 2025, 6:12 ]
Post subject:  Re: PC3000 ProtableIII and PRO Dedicated NVME Adapter
Hi
Does anyone know where I can find that extension cable/adapter? Aliexpress?

Attachments:
SSD_1.JPG
SSD_1.JPG [ 124.55 KiB | Viewed 1721 times ]
Author:  Davyde1190 [ September 3rd, 2025, 6:14 ]
Post subject:  Re: PC3000 ProtableIII and PRO Dedicated NVME Adapter
ccc wrote:
Hi
Does anyone know where I can find that extension cable/adapter? Aliexpress?

Hi! If you find it you can send me a pm? I need too
Author:  ccc [ September 3rd, 2025, 6:28 ]
Post subject:  Re: PC3000 ProtableIII and PRO Dedicated NVME Adapter
Hi
I hope that Flashguys will come with an answer here....Or anyone else.....
Author:  Davyde1190 [ September 3rd, 2025, 7:12 ]
Post subject:  Re: PC3000 ProtableIII and PRO Dedicated NVME Adapter
ccc wrote:
Hi
I hope that Flashguys will come with an answer here....Or anyone else.....


https://a.aliexpress.com/_EvjatCS
Author:  ccc [ September 4th, 2025, 8:39 ]
Post subject:  Re: PC3000 ProtableIII and PRO Dedicated NVME Adapter
I know about it....
I want an extension, I need to do exactly what he did in the picture. PC3000 on a shelf and the adapter away from it.
Author:  ccc [ October 16th, 2025, 5:15 ]
Post subject:  Re: PC3000 ProtableIII and PRO Dedicated NVME Adapter
Hi
I ordered one piece from him, package arrived, all is OK
Contact him 49335007@qq.com on Teams.

Rgds
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/