| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| 40Gb ATMR NVRAM and other problem? http://forum.hddguru.com/viewtopic.php?f=15&t=8193 |
Page 1 of 1 |
| Author: | pcimage [ December 13th, 2007, 13:13 ] |
| Post subject: | 40Gb ATMR NVRAM and other problem? |
Hi all, I'm running out of ideas with this one.... 40Gb ATMR P/N 08K0852 MLC: H69421 Dell P/N 0C2180 Initially it did not spin up, went straight to "safe mode" On investigation I saw that the first two bytes of the NVRAM had been set to "00 00", which is clearly wrong. I change back to the usual "44 41", now it spins but clicks. So I swap PCB with one of same f/w version, it spins and comes "DRDY DSC" but cannot ID the model, or read anything from SA. I ordered in an exact duplicate donor (same model, date, p/n, MLC - Everything, even serial is very close), still same. Is there a way to hot swap these, I don't think there is? Any ideas guys??? Cheers Sean |
|
| Author: | pcimage [ December 13th, 2007, 15:10 ] |
| Post subject: | Re: 40Gb ATMR NVRAM and other problem? |
Oops, wrong forum. Sorry. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|