Hey!
I'm not near you but I do have this PCB. Do you have PC3000 to reprogram the ROM?
Sean (note the spelling
)
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| PCB board for Maxtor, Western, Seagate http://forum.hddguru.com/viewtopic.php?f=15&t=8426 |
Page 1 of 2 |
| Author: | harddrivespecialist [ January 23rd, 2008, 23:28 ] |
| Post subject: | PCB board for Maxtor, Western, Seagate |
Excellent working condition PCB Logic Boards for Hard Drives of following Manufacturers: Maxtor, Western Digital, Seagate, IBM, Samsung and many more Manufacturers Usual sizes start from 10GB and up to 500GB Prices start from $19.95 for 20GB, 40GB Drives and up to $49.95 for Top of the line drives. Shipping cost is $2.00 within USA. We cannot guarantee your drive to be repaired by replacing the board, but we do guarantee our boards in good working condition. With your request, send us a details of your hard drive. Every info that you will provide about your drive will help us serve your needs better. You can also find us on ebay, ebay id: harddrivespecialist or just type in search field: PCB board for Maxtor, Western, Seagate |
|
| Author: | harddrivespecialist [ February 23rd, 2008, 0:26 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
Hi! We can also supply donor drives for data recovery. Send your requests in anytime. |
|
| Author: | rafaela [ March 15th, 2008, 15:04 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
Seagate ST3500830AS 500 SATA Wanted |
|
| Author: | pasco [ March 17th, 2008, 5:27 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
Have you a PCB Board for a Maxtor DiamondMax VL 40 PCBA 07A? |
|
| Author: | neoborn [ March 18th, 2008, 13:23 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagatest |
Seagate ST3120026AS Internal Barracuda 7200 120 GB SATA Hard Drive 9W2813-301 |
|
| Author: | harddrivespecialist [ March 21st, 2008, 23:28 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
Hi Everyone! I would be able to help much better and faster, if you would pm me on your request. In a lot of cases, I can't see your message, until I visit a site. Thank you for your support. |
|
| Author: | seagrasser [ May 9th, 2008, 14:10 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
pm sent |
|
| Author: | Bazza [ May 9th, 2008, 22:03 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
harddrivespecialist, harddrivespecialist, I have a broken Maxtor DiamondMax 10 200GB PATA 133 HDD Code: BAH41B70 SN: B413LKOH 6B200P0040611 3.5 Series LBA:398297088 Would you have a replacement circuit board? |
|
| Author: | rameez [ May 11th, 2008, 14:40 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
What is the 5 letter code on the pcb ? |
|
| Author: | Bazza [ May 12th, 2008, 7:22 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
rameez wrote: What is the 5 letter code on the pcb ? Board details are: Topsearch 94V-0 TS-M-8V01C 4104-9498 Maxtor Corp 301956500 SABRE/RCP/RP |
|
| Author: | rameez [ May 17th, 2008, 11:54 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
the five letter code on the ide connector like b3fda . |
|
| Author: | arthuso [ February 28th, 2010, 20:19 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
Want: PCB Board - Seagate IDE-PATA 500gb ST3500641A - RK barracuda 3.5 PCB NUMBER 100406538 REV A Do you have this model for sale ? Tks ! Arthuso |
|
| Author: | fzabkar [ February 28th, 2010, 22:48 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
arthuso wrote: Want: PCB Board - Seagate IDE-PATA 500gb ST3500641A - RK barracuda 3.5 Can you upload a detailed photo of the component side? What is the failure symptom? |
|
| Author: | poehere [ March 1st, 2010, 17:24 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
Code: Can you upload a detailed photo of the component side? What is the failure symptom?: I do not know about others but this is becoming a standard request from you. Even if someone tells the truth it is not possible to change the pcb on this drive you still post the same request over and over again. What is it do you just like seeing photos of a pcb board? Over 60% of your post state the same thing. If you claim you are not a DR person then why continue to request to see a photo of a pcb board. |
|
| Author: | fzabkar [ March 1st, 2010, 18:02 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
poehere wrote: Code: Can you upload a detailed photo of the component side? What is the failure symptom?: I do not know about others but this is becoming a standard request from you. Even if someone tells the truth it is not possible to change the pcb on this drive you still post the same request over and over again. What is it do you just like seeing photos of a pcb board? Over 60% of your post state the same thing. If you claim you are not a DR person then why continue to request to see a photo of a pcb board. My sole motivation is to help. I have no commercial interests. If someone is requesting a PCB, it is safe to assume that they have a broken one. In order to assess the problem, I need to see the subject PCB. I'm not a DR guy, but I am proficient in the repair and troubleshooting of all manner of electronic equipment. In fact, it is my observation that the average DR guy wouldn't pass Electronics 101. I cut my teeth on hard drives when they were 250 kg monsters. I operated my own business, troubleshooting and repairing minicomputer boards and peripherals to chip level, on-site, with only basic tools and no schematics. These boards were 15" x 15", and had around 300 chips. The 3-chip PCBs that you DR guys work with are insignificant by comparison. So, yes, I don't have your particular experience, but I have relevant electronic experience nonetheless. In fact, the archives will show that I have helped several people repair their PCBs when they were ready to buy one (and then face the problem of transplanting EEPROMs). I hope that's not the reason for your annoyance. I have very little faith left in humanity, as is. |
|
| Author: | Alexii [ March 2nd, 2010, 16:33 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
poehere wrote: Code: Can you upload a detailed photo of the component side? What is the failure symptom?: I do not know about others but this is becoming a standard request from you. Even if someone tells the truth it is not possible to change the pcb on this drive you still post the same request over and over again. What is it do you just like seeing photos of a pcb board? Over 60% of your post state the same thing. If you claim you are not a DR person then why continue to request to see a photo of a pcb board. Try Shean at PCimage, he is near u. Wait. What? Back on topic. Found myself in need of: WD5000AAJS-32TKA0 Dec 15 2006 DCM HBRCNV2AB PCB 2061-701477-000 AB Will pay good since the drive is rare. PS fzabkar dont lose ur faith in humanity just yet =) U are a fine example that good ppl are still around =) |
|
| Author: | pcimage [ March 2nd, 2010, 17:10 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
Hey! I'm not near you but I do have this PCB. Do you have PC3000 to reprogram the ROM? Sean (note the spelling )
|
|
| Author: | Alexii [ March 3rd, 2010, 11:08 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
heya Sean. Got a lot of responses for that board and sorting through em now. Ty for ur offer =) And yes, i do have access to PC3000. PS ( note , i noted the spelling hehehe ) Cheers )
|
|
| Author: | flava [ April 18th, 2010, 7:50 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
Hi there i have a 320 gig seagate barracuda 7200.10 hard drive which i need a new pcb for the 5 digit code i can see on the ide connector is 87013 please let me know if you need any other info thanks in advance 
|
|
| Author: | hdrescue [ April 19th, 2010, 9:56 ] |
| Post subject: | Re: PCB board for Maxtor, Western, Seagate |
Hi Flava Just try to clean That dirty contacts with a rubber and try to connect the PCB again. Let me know the result Thanks |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|