HDD GURU FORUMS
http://forum.hddguru.com/

WD3200JB drive needed
http://forum.hddguru.com/viewtopic.php?f=15&t=8650		 Page 1 of 1
Author:  Odiferous [ March 12th, 2008, 9:51 ]
Post subject:  WD3200JB drive needed
I think it's just a PCB problem, but may be the heads.

WD3200JB-00KFA0
DCM: DSBACAJCH
Thailand

PCB: 2060-701314-002 REV A


Thanks

Duncan
Author:  martcom [ April 2nd, 2008, 12:33 ]
Post subject:  Re: WD3200JB drive needed
Hello

We have used parts and pcb boards for hard drives mail for parts

If we have i will try to help with parts
Author:  Odiferous [ April 2nd, 2008, 15:37 ]
Post subject:  Re: WD3200JB drive needed
martcom wrote:
Hello

We have used parts and pcb boards for hard drives mail for parts

If we have i will try to help with parts


Your answer _should_ have read,

"Yes, we can help you - we have that specific drive with matching firmware in stock."

Which further details could I have supplied???

Thanks - but no thanks very much.


Duncan
Author:  martcom [ April 2nd, 2008, 15:52 ]
Post subject:  Re: WD3200JB drive needed
Odiferous wrote:
martcom wrote:
Hello

We have used parts and pcb boards for hard drives mail for parts

If we have i will try to help with parts


Your answer _should_ have read,

"Yes, we can help you - we have that specific drive with matching firmware in stock."

Which further details could I have supplied???

Thanks - but no thanks very much.


Duncan



ok but pitty cos was just about to throw them in the bin and would of sent for free

many thanks any ways
Author:  rchadwick [ April 2nd, 2008, 16:15 ]
Post subject:  Re: WD3200JB drive needed
Just some friendly advice.... If you don't want to be mistaken for a spammer, don't act like one.
Author:  Dmitry Postrigan [ April 10th, 2008, 8:19 ]
Post subject:  Re: WD3200JB drive needed
martcom warned. Next time = ban.

Thanks
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/