| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Maxtor DiamondMax 21 PCB REALLY NEED http://forum.hddguru.com/viewtopic.php?f=15&t=9027 |
Page 1 of 1 |
| Author: | hlkc [ May 15th, 2008, 18:42 ] |
| Post subject: | Maxtor DiamondMax 21 PCB REALLY NEED |
Maxtor 500GB SATA DiamondMax 21 Maxtor A/N 5QG06J9RSTM3500630AS P/N 9DP146-326 6A500F0 If you have such board please let me know and I really need to get the data out. thanks! hlkc@yahoo.com |
|
| Author: | rameez [ May 17th, 2008, 11:51 ] |
| Post subject: | Re: Maxtor DiamondMax 21 PCB REALLY NEED |
What is the five letter code on the pcb ? |
|
| Author: | hlkc [ May 17th, 2008, 13:18 ] |
| Post subject: | Re: Maxtor DiamondMax 21 PCB REALLY NEED |
rameez wrote: What is the five letter code on the pcb ? I am newbie here... in PCB there is no 5 lette code but near that attach there is a white sticker and indicated OZCEB and underline. Is that what you looking for? Please let me know. Thanks! |
|
| Author: | rameez [ May 23rd, 2008, 15:15 ] |
| Post subject: | Re: Maxtor DiamondMax 21 PCB REALLY NEED |
ok tell me the number on the CPU like Agere D4-D4 |
|
| Author: | hlkc [ May 23rd, 2008, 16:49 ] | ||||
| Post subject: | Re: Maxtor DiamondMax 21 PCB REALLY NEED | ||||
rameez wrote: ok tell me the number on the CPU like Agere D4-D4 I don't think you asked me the computer CPU, right? I have P4 3.5GHZ. Attached is the PCB, take a look and the info might be that. Sorry I don't know too well about HDD. Thanks and hope you can help.
|
|||||
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|