HDD GURU FORUMS http://forum.hddguru.com/ |
|
WD800BB-00DKA0 PCB anyone? http://forum.hddguru.com/viewtopic.php?f=15&t=9173 |
Page 1 of 1 |
Author: | jinsoup27 [ June 8th, 2008, 1:15 ] |
Post subject: | WD800BB-00DKA0 PCB anyone? |
My old 80gb started spouting blue smoke a few months ago. After buying a Torx set and peeling off the pcb (and searching online), it was evident that the motor controller finally fried. I saw one on ebay for the exact model and the seller asks for a DCM and everything. People from other forums say it worked out for them, but it costs $73 just to get the customized board shipped here. So... Anyone have a spare PCB? and/or know how to get a firmware chip onto a different PCB? thanks |
Author: | thatdellguy [ June 8th, 2008, 2:32 ] |
Post subject: | Re: WD800BB-00DKA0 PCB anyone? |
http://cgi.ebay.com/PCB-Board-for-Weste ... 18Q2el1247 |
Author: | rameez [ June 13th, 2008, 3:30 ] |
Post subject: | Re: WD800BB-00DKA0 PCB anyone? |
I have pcb for the drive . |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |