| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Wanted PCB for WD2500BB-98GUA0 http://forum.hddguru.com/viewtopic.php?f=15&t=9340 |
Page 1 of 1 |
| Author: | jangid [ July 3rd, 2008, 15:12 ] |
| Post subject: | Wanted PCB for WD2500BB-98GUA0 |
Hi, I desperately need to get the data from this drive. I'm guessing that the PCB has died but nothing seems to have burned out. I tried another WD PCB and the drive spins but obviously is not readable without the correct PCB. Other info on the drive is as follows: Date: 31 Jul 2004, DCM: HSCACTJAA, on the PCB itself: 2060-001266-001 REV A, on the Barcode: 2061-701265-200 AL XC1X68 AWBY 6 0005380 6385. Thanks in advance for any help. |
|
| Author: | rameez [ July 6th, 2008, 11:55 ] |
| Post subject: | Re: Wanted PCB for WD2500BB-98GUA0 |
can u show the pic of the pcb ? |
|
| Author: | pcimage [ July 7th, 2008, 9:19 ] |
| Post subject: | Re: Wanted PCB for WD2500BB-98GUA0 |
I have a PCB to suit this drive. Although you WILL have to swap the ROM chip over, as all later WD drives. msn me sean@pcimage.co.uk if interested. Cheers Sean |
|
| Author: | jangid [ July 28th, 2008, 15:15 ] |
| Post subject: | Re: Wanted PCB for WD2500BB-98GUA0 |
Hi - I got a replacement board which worked for a few mins then started making beeping sounds. I have a soldering iron, which is the ROM chip? Sorry can't send a photo at present - how much do you want for the board? Cheers, Jan |
|
| Author: | unknown [ July 28th, 2008, 15:46 ] |
| Post subject: | Re: Wanted PCB for WD2500BB-98GUA0 |
1266 will work too but u have to swap the ROM ( U12 ) |
|
| Author: | rameez [ July 30th, 2008, 0:38 ] |
| Post subject: | Re: Wanted PCB for WD2500BB-98GUA0 |
I have this pcb in my stock PM for details . |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|