Good place to start
Forum rules
No new topics are allowed in this forum. Please use other forums to create topics.
October 15th, 2019, 19:04
Hi guys
I can You help me to diagnose and repair my HDD WD10JPVX
It's been dropped and now it's cliking when I try to connect it to laptop.
Victoria show me me this information
- Code:
11:39:09 : Get drive passport... OK
11:39:09 : Get drive passport... OK
11:39:09 : Recallibration... Error!
11:39:09 : SMART: HDA temperature sensor not detected!
11:39:10 : Starting mechanical test: 0...0 LBA, reading, Timeout = 200ms
11:39:10 : Seek unknown error! (LBA 0)
11:39:10 : Stopping drive... HD Spindle is stopped
What can I do to get it working again
- Attachments
-
October 15th, 2019, 19:22
h00tdog wrote:What can I do to get it working again
nothing "YOU" can do about that
send it to A "DATA RECOVERY" pro
October 15th, 2019, 19:26
that I know but data on it its worth 0$ so that's why I'm interested to take a look on it is this some pcb problem or internal ??
October 15th, 2019, 22:08
It's an internal problem. The OS is detecting the JMicron USB-SATA bridge IC, not the HDD behind the bridge.
October 16th, 2019, 3:25
HaspHL wrote:h00tdog wrote:What can I do to get it working again
nothing "YOU" can do about that
send it to A "DATA RECOVERY" pro
Agree 100%
It’s been dropped, and it’s clicking.
Zero chance it’s the PCB and it cannot be “fixed” by DIY.
November 12th, 2019, 9:22
h00tdog wrote:that I know but data on it its worth 0$ so that's why I'm interested to take a look on it is this some pcb problem or internal ??
Murphy was an optimist
November 12th, 2019, 18:28
[quote][/quote]
yes Rameez that's right .... feeling IC heat is one of the most common methods to detect the Motor Ic Damage especially when the hard drive didn't respond after we power it on .... but when the motor IC is responsible for the Continuous Noise i think it's never got Hot and its' temperature will be normal although it's already damaged ... so we have to replace it.
November 12th, 2019, 18:30
h00tdog wrote:Hi guys
I can You help me to diagnose and repair my HDD WD10JPVX
It's been dropped and now it's cliking when I try to connect it to laptop.
Victoria show me me this information
- Code:
11:39:09 : Get drive passport... OK
11:39:09 : Get drive passport... OK
11:39:09 : Recallibration... Error!
11:39:09 : SMART: HDA temperature sensor not detected!
11:39:10 : Starting mechanical test: 0...0 LBA, reading, Timeout = 200ms
11:39:10 : Seek unknown error! (LBA 0)
11:39:10 : Stopping drive... HD Spindle is stopped
What can I do to get it working again
yes Rameez that's right .... feeling IC heat is one of the most common methods to detect the Motor Ic Damage especially when the hard drive didn't respond after we power it on .... but when the motor IC is responsible for the Continuous Noise i think it's never got Hot and its' temperature will be normal although it's already damaged ... so we have to replace it.
December 10th, 2019, 1:19
Excellent share!
Powered by phpBB © phpBB Group.