All times are UTC - 5 hours [ DST ]


Forum rules


No new topics are allowed in this forum. Please use other forums to create topics.



Post new topic Reply to topic  [ 50 posts ]  Go to page Previous  1, 2, 3
Author Message
 Post subject: Re: Noise related to PCB in WD HDDs (Final Edition)
PostPosted: October 15th, 2019, 19:04 
Offline

Joined: October 15th, 2019, 18:58
Posts: 2
Location: london
Hi guys

I can You help me to diagnose and repair my HDD WD10JPVX
It's been dropped and now it's cliking when I try to connect it to laptop.
Victoria show me me this information
Code:
11:39:09 : Get drive passport... OK
11:39:09 : Get drive passport... OK
11:39:09 : Recallibration... Error!
11:39:09 : SMART: HDA temperature sensor not detected!
11:39:10 : Starting mechanical test: 0...0 LBA, reading, Timeout = 200ms
11:39:10 : Seek unknown error! (LBA 0)
11:39:10 : Stopping drive... HD Spindle is stopped


What can I do to get it working again


Attachments:
HDD wd problem.png
HDD wd problem.png [ 150.68 KiB | Viewed 42040 times ]
Top
 Profile  
 
 Post subject: Re: Noise related to PCB in WD HDDs (Final Edition)
PostPosted: October 15th, 2019, 19:22 
Offline

Joined: March 4th, 2019, 8:33
Posts: 78
h00tdog wrote:
What can I do to get it working again

nothing "YOU" can do about that
send it to A "DATA RECOVERY" pro


Top
 Profile  
 
 Post subject: Re: Noise related to PCB in WD HDDs (Final Edition)
PostPosted: October 15th, 2019, 19:26 
Offline

Joined: October 15th, 2019, 18:58
Posts: 2
Location: london
that I know but data on it its worth 0$ so that's why I'm interested to take a look on it is this some pcb problem or internal ??


Top
 Profile  
 
 Post subject: Re: Noise related to PCB in WD HDDs (Final Edition)
PostPosted: October 15th, 2019, 22:08 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16000
Location: Australia
It's an internal problem. The OS is detecting the JMicron USB-SATA bridge IC, not the HDD behind the bridge.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Noise related to PCB in WD HDDs (Final Edition)
PostPosted: October 16th, 2019, 3:25 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7845
Location: UK
HaspHL wrote:
h00tdog wrote:
What can I do to get it working again

nothing "YOU" can do about that
send it to A "DATA RECOVERY" pro


Agree 100%

It’s been dropped, and it’s clicking.

Zero chance it’s the PCB and it cannot be “fixed” by DIY.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Noise related to PCB in WD HDDs (Final Edition)
PostPosted: November 12th, 2019, 9:22 
Offline

Banned User

Joined: November 12th, 2019, 9:00
Posts: 1
Location: france
h00tdog wrote:
that I know but data on it its worth 0$ so that's why I'm interested to take a look on it is this some pcb problem or internal ??

Murphy was an optimist


Top
 Profile  
 
 Post subject: Re: Noise related to PCB in WD HDDs (Final Edition)
PostPosted: November 12th, 2019, 18:28 
Offline

Joined: November 12th, 2019, 18:25
Posts: 3
Location: poland
[quote][/quote]
yes Rameez that's right .... feeling IC heat is one of the most common methods to detect the Motor Ic Damage especially when the hard drive didn't respond after we power it on .... but when the motor IC is responsible for the Continuous Noise i think it's never got Hot and its' temperature will be normal although it's already damaged ... so we have to replace it.


Top
 Profile  
 
 Post subject: Re: Noise related to PCB in WD HDDs (Final Edition)
PostPosted: November 12th, 2019, 18:30 
Offline

Joined: November 12th, 2019, 18:25
Posts: 3
Location: poland
h00tdog wrote:
Hi guys

I can You help me to diagnose and repair my HDD WD10JPVX
It's been dropped and now it's cliking when I try to connect it to laptop.
Victoria show me me this information
Code:
11:39:09 : Get drive passport... OK
11:39:09 : Get drive passport... OK
11:39:09 : Recallibration... Error!
11:39:09 : SMART: HDA temperature sensor not detected!
11:39:10 : Starting mechanical test: 0...0 LBA, reading, Timeout = 200ms
11:39:10 : Seek unknown error! (LBA 0)
11:39:10 : Stopping drive... HD Spindle is stopped


What can I do to get it working again

yes Rameez that's right .... feeling IC heat is one of the most common methods to detect the Motor Ic Damage especially when the hard drive didn't respond after we power it on .... but when the motor IC is responsible for the Continuous Noise i think it's never got Hot and its' temperature will be normal although it's already damaged ... so we have to replace it.


Top
 Profile  
 
 Post subject: Re: Noise related to PCB in WD HDDs (Final Edition)
PostPosted: December 10th, 2019, 1:19 
Offline

Joined: December 10th, 2019, 1:18
Posts: 1
Location: maharashtra
Excellent share!


Top
 Profile  
 
 Post subject: Re: Noise related to PCB in WD HDDs (Final Edition)
PostPosted: October 28th, 2024, 3:24 
Offline

Joined: October 28th, 2024, 3:22
Posts: 1
Location: China
thanks ,that`s great.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 50 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group