Switch to full style
Discussions related to Atola Insight data recovery/Forensic suite, Atola Bandura standalone imager
Post a reply

Seagate Terminal LOG - error

February 6th, 2009, 7:15

Hi can Atola tell-me wich is this error?


Code:
Interface task reset
4096k x 16 buffer detected
MERCURY - 1_Disk    3.02  08-23-05 15:41

Buzz  - Head Mask FFFF - Switch to full int.
$Head Mask FFFF - Head Mask FFFF - Switch to full int.
$Head Mask FFFF - Head Mask FFFF - Switch to full int.
$



Thanks
ZeBong

Re: Seagate Terminal LOG - error

February 6th, 2009, 15:42

:lol: Good question to Atola gurus :lol: Any ideas? He-he :D
Actually, I suppose this terminal message from PC3K UDMA terminal appears when heads are dirty. Sometimes when you see many symbols $ in terminal it caused with lost servolabels. But in this case I suppose better to perform PCB swap and look again in terminal.

Re: Seagate Terminal LOG - error

February 6th, 2009, 15:47

Hi that´s what i did it.

Afther change the PCB the error is different.



Code:
Interface task reset
4096k x 16 buffer detected
MERCURY - 1_Disk    3.02  08-
Buzz  - 23-05 15:41
Head Mask FFFF - Switch to full int.
              Spin Ready
3.02  08-23-05 15:45
(P)PATA Reset
$$$$$$$Head Mask FFFF - Head Mask FFFF -



But i think is easy for the tool to read the terminal and know what is it.

Re: Seagate Terminal LOG - error

February 6th, 2009, 15:54

Now you can see that drive is spins, right?
Did you try to load from loader?

Re: Seagate Terminal LOG - error

February 9th, 2009, 5:37

Come on....!!! If you don't know what this error means it is better to go and start baking cakes for your local cafe..... :O)

Re: Seagate Terminal LOG - error

February 9th, 2009, 11:47

Did you perform any physical work on this HDD before this terminal output?

Re: Seagate Terminal LOG - error

February 9th, 2009, 11:51

Yes, i haved change the heads and the PCB.

I Could make the disk :)

Thanks
ZeBong

Re: Seagate Terminal LOG - error

February 9th, 2009, 14:41

guru wrote:Come on....!!! If you don't know what this error means it is better to go and start baking cakes for your local cafe..... :O)

Ok, I will, but could guru say what is the problem exactly? 100%?

Re: Seagate Terminal LOG - error

February 24th, 2009, 15:12

http://www.myharddrivedied.com/presenta ... paper.html


is says

13. Seagate Drives use a serial interface of which you can find online. It will show you stats on the drive. If you see FFFF mask FFFF mask it is a head error.

Re: Seagate Terminal LOG - error

February 24th, 2009, 18:31

LiK wrote:http://www.myharddrivedied.com/presentations/presentations_whitepaper.html


is says

13. Seagate Drives use a serial interface of which you can find online. It will show you stats on the drive. If you see FFFF mask FFFF mask it is a head error.



I suppose if scott moulton said it then it must be true..... :roll:
Post a reply