HDD GURU FORUMS

Has anyone had any success in getting the older Atola Insight USB to work on a Windows 10 x64 system? If so, can you share the device drivers?

Pesky

PeskyBit wrote:Has anyone had any success in getting the older Atola Insight USB to work on a Windows 10 x64 system? If so, can you share the device drivers?

Pesky

Hi ,
The atola developers are the best that can give this answer .This device interfaces with computer via USB Port .If Yes might be they use prolific or ftdi usb chips in that case you do have a chance .But then the software might be a issue .

Please reboot Windows 10 in a mode enabling to install unsigned drivers. Here is one of online manuals for that:

http://en.code-bude.net/2015/08/19/how-to-install-unsigned-drivers-in-windows-10/

Then you can install these two included in the full Atola Insight installation:
* Atola (atolata) USB (04/06/2011 6.1.7600.16385)
* Silicon Labs Software (SIUSBXP) USB (02/06/2007 3.1)

More actions are needed to be performed for HASP driver installation:
1. Download new Sentinel HASP version 7.41: http://sentinelcustomer.safenet-inc.com/DownloadNotice.aspx?dID=8589947873
2. Unzip it.
3. Disable firewall and antivirus
4. Run CMD as Administrator, change folder to the one with downloaded file at point 1
5. Execute the following commands:
haspdinst.exe -r -fr -kp -fss -purge
haspdinst.exe -i -fi -kp -fss

Hi!
I have an Atola Insight USB, with program version 3.4
I updated my system to Windows 10, installed drivers, and the Atola Insight software does not find my Disk Sense Unit.
What did i wrong?

saltwater wrote:What did i wrong?

You bought Atola. That's what

It worked well on Windows 7.
I think i have to bin my W10 serial key.

Cheers mate!
It's a very good tool for diagnosing.

data-medics wrote:

saltwater wrote:What did i wrong?

You bought Atola. That's what