Switch to full style
Discussions related to SalvationData products
Post a reply

problem with sagate 500 gb baracuda 12

September 4th, 2009, 4:32

hello every one
i have problem with my hardrive : no detect
ST3500418AS BARACUDA 12
FIRM : CC34
S/N: 6VMOC46F
ANY ONE CAN HELP ME

Re: problem with sagate 500 gb baracuda 12

September 6th, 2009, 16:15

cakedi wrote:i have problem with my hardrive : no detect

Please what do you mean by that. Can't really comprehend the english statement.

"no detect"
-- where-(bios, usb, windows....)
-- what( what diagnosis have u done so far, mhdd, hdd scan, diximage,....)

Re: problem with sagate 500 gb baracuda 12

September 8th, 2009, 6:49

I would not expect that the Salvation Seagate Doctor supports 7200.12 series yet. The 7200.11 support is quite limited, and only goes as far as fixing the LBA 0 / Busy issues.

Re: problem with sagate 500 gb baracuda 12

September 8th, 2009, 9:28

I have seen a few 7200.12 with similar 0 LBA faults as the 7200.11 disks. Anyone have any information about this? Is this going to be a repeat of the same firmware fault?

On the bright side, much nicer drives to do physical work on! :)

Re: problem with sagate 500 gb baracuda 12

September 10th, 2009, 5:49

cakedi wrote:hello every one
i have problem with my hardrive : no detect
ST3500418AS BARACUDA 12
FIRM : CC34
S/N: 6VMOC46F
ANY ONE CAN HELP ME


What do you want from this drive ???
DATA or not.

Re: problem with sagate 500 gb baracuda 12

October 14th, 2009, 3:57

i just want the data
Post a reply