seagate 7200.12

[y0k090]

Hi

Rst 0x08M
No HOST FIS-ReadyStatusFlags 2002B001
ASCII Diag mode

F3 T>/2

F3 2>Z

HighPowerMode
Spin Down Complete
Elapsed Time 0.102 msecs
F3 2>U

HighPowerMode

ExecuteSpinRequest

Spin Up Complete
Elapsed Time 3.763 secs
F3 2>/t

F3 T>m0,2,2,,,,,22

RW subfile error 201F
RW subfile error 201F
SIM Error 201F
DiagError 0000500E Process Defect List Error
R/W Sense 00000002, R/W Error 841C0087, List Offset 00000000, List Index 0025633B, File Error 000000D0

F3 T>

please, how to fix
thanks

[hddguy]

F3 T>/2

F3 2>Z

HighPowerMode
Spin Down Complete
Elapsed Time 0.102 msecs
F3 2>U

HighPowerMode

ExecuteSpinRequest

Spin Up Complete

Why do you do this?

F3 T>m0,2,2,,,,,22

And why do you instantly run this command without checking the presence of of complications like non resident list?

If this is a clients disk, I suggest you send to a professional.

[northwind]

Another 7200.11 tutorial followed blindly for a 7200.12 ...

[y0k090]

F3 T>/2

F3 2>Z

HighPowerMode
Spin Down Complete
Elapsed Time 0.102 msecs
F3 2>U

HighPowerMode

ExecuteSpinRequest

Spin Up Complete

Why do you do this?

F3 T>m0,2,2,,,,,22

And why do you instantly run this command without checking the presence of of complications like non resident list?

If this is a clients disk, I suggest you send to a professional.

I am using seagate HD doctor.
I want to repair, do not need data.
I can not check any public list.
I can not load from HDD

[y0k090]

Another 7200.11 tutorial followed blindly for a 7200.12 ...

What is the command used to 7200.12
any signal you can give. I think it will get the error.

[hddguy]

do not need data.

Why would you want to repair? chances are its under warranty, RMA it.

[y0k090]

do not need data.

Why would you want to repair? chances are its under warranty, RMA it.

I need to fix it.
I have followed the statements Salvationdata forum, but no success.

[BlackST]

RW subfile error 201F
RW subfile error 201F
SIM Error 201F
DiagError 0000500E Process Defect List Error
R/W Sense 00000002, R/W Error 841C0087, List Offset 00000000, List Index 0025633B, File Error 000000D0

It is "something more" than usual problems , "internet fix" doesn't work in this state and also, in my opinion, is dangerous for data. Does SA read ?

[hddguy]

The translator command was run instantly after spinup, this will never work and always produce error.

[y0k090]

The translator command was run instantly after spinup, this will never work and always produce error.

This command is always used for the following cases:

Rst 0x08M
No HOST FIS-ReadyStatusFlags 2002B001

why it can not be used in this case.
70% success when using this command.
the problem is there any other way, I was trying to test the command.
results are not as expected.

[y0k090]

It is "something more" than usual problems , "internet fix" doesn't work in this state and also, in my opinion, is dangerous for data. Does SA read ?

if the bad sectors in SA, how to fix, or no solution.
Salvation is often said by the SA, but they can not provide a solution.