If it does not help let me know ..send me . I have anothers that might work.
| Attachments: |
WDC WD1600AAJB-00J3A001. 03E01.rar [5.31 MiB]
Downloaded 1479 times |
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Need firmware WDC WD1600AAJB-00J3A0 http://forum.hddguru.com/viewtopic.php?f=20&t=16526 |
Page 1 of 1 |
| Author: | Dede1 [ July 30th, 2010, 10:34 ] |
| Post subject: | Need firmware WDC WD1600AAJB-00J3A0 |
Hi guys, I need firmware for WDC WD1600AAJB-00J3A0 Thank you in advance |
|
| Author: | einstein9 [ August 20th, 2010, 17:43 ] |
| Post subject: | Re: Need firmware WDC WD1600AAJB-00J3A0 |
SN? |
|
| Author: | Tawfeek [ August 26th, 2010, 5:37 ] | ||
| Post subject: | Re: Need firmware WDC WD1600AAJB-00J3A0 | ||
If it does not help let me know ..send me . I have anothers that might work.
|
|||
| Author: | costi07 [ January 7th, 2011, 22:06 ] | ||
| Post subject: | Re: Need firmware WDC WD1600AAJB-00J3A0 | ||
I did not know how I set the password. I was trying to give a zero-fill using wd utilities from Hiren boot cd. At one point I created a partition using the WD utilities setup and it creates me a 137GB partitionsetting LBA to 24(I think). After some struggle I managed to set the lba to 48 I set after I did it (I donțt remember what program I used) with MHDD I discovered that the HDD is password protected. Currently WD utiities I do not work anymore, when I try to start it, I see the pointer for about 2 seconds and it closes. Also my(gigabyte) motherboard may saved a copy of bios on it. Searching on internet I discovered that a rewrite of the firmware may resolve the problem. Help pls. sry for my english.
|
|||
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|