good work.
This case was easy, but now it is not.
Seek for professional help (and for professional tools) ....
Janos
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| WD2500bevs-26vat0 http://forum.hddguru.com/viewtopic.php?f=20&t=16766 |
Page 1 of 1 |
| Author: | ppumkin [ August 20th, 2010, 19:37 ] |
| Post subject: | WD2500bevs-26vat0 |
I have been bashing my brains with this hdd. Initially plugged into DC and it went Ready- opened explorer read the partitions i could see the file structure selected the files and started to recover- after 1s sector(PIO) hard drive buzzed and did not respond. Plugged in HD doctor. did not go ready-- tried many times- spins up 2 minutes down and twice like that. I got it to PCB mode and read the ROM- the head map is 0,2,3,4 - is that normal? I checked with donor and its head map is 1,2,3,4 After messing about with res file conversions and all that i tried the hot swap procedure. read patient p/glist write to donor. The drive went ready for a while and i could read a few modules of the patient and then died completely Using the donor pcb the drive spins up but clicks- and cannot access data. Another thing is i cannot find the proper PCB donor based on FW xxVAxx .. Drive does not spin up with original PCB now- stays in PCB mode in HD Doctor. can only read/write rom.. Any tips on how to rule out PCB or Heads. Thanks for looking and for any helpful replies. |
|
| Author: | N.C. [ August 21st, 2010, 4:53 ] |
| Post subject: | Re: WD2500bevs-26vat0 |
good work. This case was easy, but now it is not. Seek for professional help (and for professional tools) .... Janos |
|
| Author: | ppumkin [ August 21st, 2010, 5:06 ] |
| Post subject: | Re: WD2500bevs-26vat0 |
Thanks PS But my psychiatrist no longer want to help me.I am driving him nuts. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|