HDD GURU FORUMS

Hi To All Of HDDGURU FORUM ADMIN,SUP MOD,MOD And USERS

I Am Jignesh Pankhania From India I Am Salvation User
Today I Have One Drive Comes To Data Recovery.
Here Is Drive Specs
Seagate Momentus 7200.4 160GB SATA
Model No: ST9160412AS
Serial No: 5VG12AMP
Firmware : 0003LVM1

Drive Problem: When Drives Comes There Is Problem It Show Me 0LBA And Drive Not Display Me Model Or Firmware Revision.
When Drive Is Going To Ready I Will Load From Drive And Nothing Loading Drive Show Me Hard Drive Family : Holiday
Then I Repair Drive Everything Is Ok But View Sector Is Not Redable Only That Problem.When I Connect The Drive In PC Normal Mode Drive Detected Normaly In Bios And Device Manager But Partition Or Drive Not Accesible.
I Try To Raw Scan But No Single Sector Is Readable.
I cant Understand What Is The Problem, Also one Thing Drive Smart Test Is Fail.
Any One Have Solution For This Problem Then Tell Me Here Or Pm Me Plz.
Thanx In Advanced

So, it's not repaired.
Post Terminal Log. Can you read all the modules? The drive is not encrypted?

hi
i think we're talking about F3 drive ... right?
so may be can be useful to us to exaclty know the commands you sent and all the operations you did.
On hdd load management when you read from hdd is normal you have only rom info, in F3 you'll not get eng rev, cert or ata rev. but did you get errors like "mod001 error" or something like that?
Let us know
Bye
Luca