Page 1 of 1
Any advice to fix P-List
Posted: May 27th, 2011, 12:02
by redseaksa
Hi
I got WD160gb with errors in P-List( head 0 and head 1)
Any advice to fix this problem to recover data?
I' would appreciate any help.
Note :Witch track No. is related to p-list ?
Thank you.
Re: Any advice to fix P-List
Posted: May 27th, 2011, 13:01
by labtech
Does the translator module have errors as well?
Re: Any advice to fix P-List
Posted: May 27th, 2011, 17:47
by redseaksa
Thank you for reply
No errors in translator
Re: Any advice to fix P-List
Posted: May 28th, 2011, 3:17
by redseaksa
redseaksa wrote:Thank you for reply
No errors in translator
Note: translator regeneration failed
Re: Any advice to fix P-List
Posted: August 31st, 2011, 6:03
by smartinfotech
redseaksa wrote:Hi
I got WD160gb with errors in P-List( head 0 and head 1)
Any advice to fix this problem to recover data?
I' would appreciate any help.
Note :Witch track No. is related to p-list ?
Thank you.
bro just check secondary modules if secondary module good then just "AUTO REPAIR" fuction to repair bad module from good one and do translator regenerator.
power off and on go to view sector check 0 and 63 sector. and reply here what happend.
Re: Any advice to fix P-List
Posted: September 12th, 2011, 9:53
by irs
hi
you say error head 0 and 1 so both copies are corrupted, you can try to open the corrupted modules and check if are corrupted in different parts you can rebuild it, or can be rebuilt from selfscan logs .. but i think wd doctor doesen't have this option
bye
Luca