| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| WD5000AAKS-22TMA0 http://forum.hddguru.com/viewtopic.php?f=20&t=20434 |
Page 1 of 1 |
| Author: | pclab [ September 2nd, 2011, 6:16 ] | ||
| Post subject: | WD5000AAKS-22TMA0 | ||
Hello I have this drive wich came with a burned diode. I removed it and the HD already spins. But now, when trying to work with it, it makes a few clicks (not loud clicks) and spins down. Can't be detected. When I try to see the head map, the heads start at 2-3-4-5, don't start from 0, as you can see from the picture. What can this be? Thanks
|
|||
| Author: | einstein9 [ September 3rd, 2011, 8:46 ] |
| Post subject: | Re: WD5000AAKS-22TMA0 |
probably one/more heads damage |
|
| Author: | irs [ September 12th, 2011, 9:49 ] |
| Post subject: | Re: WD5000AAKS-22TMA0 |
head map starting from 2 is normal on some WD families, if i remember well tornado family is like that. Bye Luca |
|
| Author: | pcimage [ September 12th, 2011, 16:37 ] |
| Post subject: | Re: WD5000AAKS-22TMA0 |
Real head map on this drive is 2,3,4,5,6,7 So as you can see the SD tool does not support this model properly. Quiet clicking followed by spin down is classic symptom of bad head(s). Member dmarques is in Portugal and comes highly recommended. |
|
| Author: | einstein9 [ September 13th, 2011, 15:20 ] |
| Post subject: | Re: WD5000AAKS-22TMA0 |
from the day i knew this SD-WD up till now, they never fixed the 103 reading in wd 2.5 i hate it really, and many bugs reported and never been fixed but @ the end of the day, it fixes few problems 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|