| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| HD Hpe Pro http://forum.hddguru.com/viewtopic.php?f=20&t=21326 |
Page 1 of 1 |
| Author: | cat1x [ December 4th, 2011, 7:43 ] |
| Post subject: | HD Hpe Pro |
Do you recommend me buying HD Hpe Pro? Do you think it's a good tool? Thanks! |
|
| Author: | thatdellguy [ December 4th, 2011, 20:28 ] |
| Post subject: | Re: HD Hpe Pro |
Use the search box and do a little research. |
|
| Author: | crecomp [ December 8th, 2011, 7:00 ] |
| Post subject: | Re: HD Hpe Pro |
Save your money and don't buy ANY crap from sd tools |
|
| Author: | cat1x [ December 10th, 2011, 4:58 ] |
| Post subject: | Re: HD Hpe Pro |
Has anyone successfully replaced a platter with this tool? I have to think thatdellguy and crecomp are right.... As replacement platter tool I doubt it's good tool, but I think as workbench, this is not very different than workbench from hddsurgey. |
|
| Author: | pcimage [ December 10th, 2011, 9:15 ] |
| Post subject: | Re: HD Hpe Pro |
For platter swapping older single and dual platter drives, then this tool does work well. Having said that, the instances of seized spindle on these old drives is rare. This tool does not support for example 7200.10/11/12 with platter guards, which make up more than 90% of all seized cases. |
|
| Author: | cat1x [ December 12th, 2011, 8:38 ] |
| Post subject: | Re: HD Hpe Pro |
pcimage wrote: This tool does not support for example 7200.10/11/12 with platter guards, which make up more than 90% of all seized cases. So do you think would be more useful this tool? http://www.dtidata.com/basereplace.htm |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|