| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| WD Doctor support for WD10TMVV http://forum.hddguru.com/viewtopic.php?f=20&t=21385 |
Page 1 of 1 |
| Author: | sknopp [ December 10th, 2011, 3:19 ] |
| Post subject: | WD Doctor support for WD10TMVV |
Does anyone know if version 6.5 of WD Doctor supports this model. I now have sata access to the drive, power on, and the device becomes ready. However, when I attempt to load from HDD, the drive goes busy. Is this a Royl series? May have done all that soldering work for nothing! |
|
| Author: | fzabkar [ December 10th, 2011, 23:50 ] |
| Post subject: | Re: WD Doctor support for WD10TMVV |
Assuming they exist, I would look for SATA PCBs that use the same Marvell MCU and motor controller and correlate those PCBs against the model numbers of those drives that use them. Edit: This may be easier: http://files.hddguru.com/download/PC-30 ... irection=1 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|