| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| WD20EARS-00MVWB0 firmware needed ... (got pc3k version) http://forum.hddguru.com/viewtopic.php?f=20&t=22435 |
Page 1 of 1 |
| Author: | luminol [ March 20th, 2012, 6:01 ] |
| Post subject: | WD20EARS-00MVWB0 firmware needed ... (got pc3k version) |
there is any chance to convert PC3000 firmware backup to the HD doctor , because i've this firm in pc3k format. Thank you all |
|
| Author: | fzabkar [ March 20th, 2012, 19:23 ] |
| Post subject: | Re: WD20EARS-00MVWB0 firmware needed ... (got pc3k version) |
For a start, you could "convert" your MODs as follows (in DOS/Windows): ren *.rpm *.mod |
|
| Author: | poehere [ March 20th, 2012, 19:27 ] |
| Post subject: | Re: WD20EARS-00MVWB0 firmware needed ... (got pc3k version) |
PC3K is interchangeable with SD FW just have to rename the .rpm to .mod |
|
| Author: | fzabkar [ March 20th, 2012, 19:45 ] |
| Post subject: | Re: WD20EARS-00MVWB0 firmware needed ... (got pc3k version) |
poehere wrote: PC3K is interchangeable with SD FW just have to rename the .rpm to .mod Thanks for the confirmation, Ann. |
|
| Author: | poehere [ March 20th, 2012, 19:47 ] |
| Post subject: | Re: WD20EARS-00MVWB0 firmware needed ... (got pc3k version) |
It is a known fact and everybody knows this one. There is no confirmation needed on this one. Only newbees do not understand this one but if you search it has been said over and over and over again on this one. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|