HDD GURU FORUMS
http://forum.hddguru.com/

help with WD20EACS-11BHUB0
http://forum.hddguru.com/viewtopic.php?f=20&t=23602
Page 1 of 1

Author:  Kum Ruzvelt [ July 30th, 2012, 6:25 ]
Post subject:  help with WD20EACS-11BHUB0

Hi,
I have WD20EACS-11BHUB0 connected on DDI become Ready, when I start imaging i receive ERR and ABRT, all sectors are yellow.
On HD Doctor I copy FW and ROM without problems, G-list have only 5 sectors. Clear SMART and Translator Regenerator successfully.
And still can not see any sector.

Author:  pclab [ July 30th, 2012, 9:45 ]
Post subject:  Re: help with WD20EACS-11BHUB0

And on SD Doctor, can you see the data?

Author:  Kum Ruzvelt [ July 30th, 2012, 9:48 ]
Post subject:  Re: help with WD20EACS-11BHUB0

No, in sector view only 6666.

Author:  pclab [ July 30th, 2012, 11:14 ]
Post subject:  Re: help with WD20EACS-11BHUB0

So, you still have issues with the HDD.

No errors during FW copy? It can be encrypted.

Author:  labtech [ July 30th, 2012, 17:23 ]
Post subject:  Re: help with WD20EACS-11BHUB0

Kum Ruzvelt wrote:
No, in sector view only 6666.

Check SN on the WD site. It will show if it came from an external that could be encrypted.

Author:  Kum Ruzvelt [ July 31st, 2012, 4:09 ]
Post subject:  Re: help with WD20EACS-11BHUB0

@labtech
Can you send me link where to check, i try and only info that i found is out of warranty.

Author:  labtech [ July 31st, 2012, 9:05 ]
Post subject:  Re: help with WD20EACS-11BHUB0

Kum Ruzvelt wrote:
@labtech
Can you send me link where to check, i try and only info that i found is out of warranty.

Replied to PM
Not out of an external casing.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/