GIKUYU wrote:
Hello
We are a DR company based in Kenya & Tanzania and have an open position for a top class DR Engineer.
The Qualified candidate should have extensive knowledge in PC-3000-UDMA, firmware repairs, head change operation, platter swap and other skills key Knowledge on RAID will be added advantage.
USD 36,000 PA, Housing & transport provided
If anyone is interested PM me and we can talk in detail.
Thanks
I Am Intrested But If Amount Is Minimum 5 Time More. lol
This Is My Key Skill.
(1) Diagnosing And Identifying Of Hard Drives Logical And Physical Problems.
(2) Identifying, repairing and rebuilding file system structure damage in FAT, NTFS, MAC,Linux And Almost
All Type Of File Systems Using Various Software.
(3) Diagnosing And Reparing Of Defective Hard Drive PCBs.
(4) Finding And Matching Donor PCB And Transfer NVRAM.
(5) Experiance To Diagnosing And Edit NVRAM Microcode In Hex Mode Using External NVRAM Reader.
(6) I Have Knoledge And Experiance To Work In Service Area For Diagnosing And Repair Firmware Problems.
(7) Performing Hard Drive Hot Waps Method With A System Area Compatible Donor Drive And PCB.
(8) Dealing With Editing Head Map In Rom And Disabling Bad Head.
(9) Specialized Techniques Such As Individual Head Imaging.
(10) Indentifying Defective Heads And Replacement Techniques Using Special Tools In A Cleanroom
Environment.
(11) Indentifying And Dealing With Seized Spindle Motors Problem In Cleanroom Environment.
(12) Indentifying And Dealing With Head Sticking On Platters Problem In Cleanroom Environment.
(13) Transplanting Of Disks Into A New Body And Motor.(MHA Replacements)
(14) Experiance And Knoledge Of Recovering Data From NAS,SAN.
(15) Experiance And Knoledge To Recover Data From Raid Level 0,1,5.
(16) Repairing And Rebuilding Raid Arrays Physically And Virtually Using Various Software Tools.
(17) More Then 4 Years Of Experiance To Using Salvation Data Tools.
(18) I Have Knoledge For Work With AceLab (Pc3000 UDMA) DAta Recovery Hardware Tool.