Switch to full style
Anything related to computer forensics (new section!)
Post a reply

WD 3TB wd30ezrx internal SATA stopped win7

November 21st, 2014, 4:29

Last night this HDD wd30ezrx work fine i copied the data to other drive but at morning drive not showing in windows.i restart the computer no recognized in bios.HDD not powering up.
HDD stop spinning while computer was on
Last edited by superkid139 on November 21st, 2014, 4:38, edited 1 time in total.

Re: WD 3TB wd30ezrx internal SATA stopped win7

November 21st, 2014, 4:32

superkid139 wrote:Last night this HDD wd30ezrx work fine i copied the data to other drive but at morning drive not showing in windows.i restart the computer no recognized in bios.HDD not powering up.


you mean drive is not spinning at all ?
BTY is it the same drive stopped working last year ?

Re: WD 3TB wd30ezrx internal SATA stopped win7

November 21st, 2014, 4:40

this an other one.this event happen today.

Re: WD 3TB wd30ezrx internal SATA stopped win7

November 21st, 2014, 7:02

here is the pic
Attachments
DSC_0008.JPG
DSC_0007.JPG

Re: WD 3TB wd30ezrx internal SATA stopped win7

November 24th, 2014, 2:08

Swap ROM on a working PCB to get the data back
Good luck

Re: WD 3TB wd30ezrx internal SATA stopped win7

November 24th, 2014, 2:13

try cleaning the j1 contacts

Re: WD 3TB wd30ezrx internal SATA stopped win7

November 24th, 2014, 5:02

i clean J1 contacts. Hard Drive start spinning there is no clickng or knocking sound but its showing 0MB in HD Tune and bios

Re: WD 3TB wd30ezrx internal SATA stopped win7

November 24th, 2014, 5:16

Can you retrieve the drive's firmware modules?

http://sediv2008.narod.ru/Easy3.9Passwo ... 567890.rar
http://sediv2008.narod.ru/Settings.rar

Re: WD 3TB wd30ezrx internal SATA stopped win7

November 24th, 2014, 14:23

this is the method to recover the firmware?
Post a reply