HDD GURU FORUMS http://forum.hddguru.com/ |
|
New head replacement tool set for Seagate 3.5" helium drives http://forum.hddguru.com/viewtopic.php?f=26&t=44711 |
Page 1 of 1 |
Author: | Dejan_HddSurgery [ January 8th, 2025, 5:35 ] |
Post subject: | Re: New head replacement tool set for Seagate 3.5" helium dr |
We are presenting a video guide for the HDDSurgery Sea 3.5" Helium P8/P9 Ramp Set. https://www.youtube.com/watch?v=FEWNaO_nmh4 This advanced tool set is designed for precise and reliable head replacement on Seagate helium-filled hard drives. It supports the following families: Evans, Evans BP and Mobula. If you have any questions or suggestions, feel free to reach out. We’re here to help! Best regards, HDDSurgery team |
Author: | fzabkar [ January 8th, 2025, 15:22 ] |
Post subject: | Re: New head replacement tool set for Seagate 3.5" helium dr |
I notice that the casting has tapped holes for a screw-on lid. Is the same casting used for the lower capacity air models? Do you use these "air lids" when repairing your helium drives? |
Author: | helpdisc [ January 9th, 2025, 17:33 ] |
Post subject: | Re: New head replacement tool set for Seagate 3.5" helium dr |
It is not topic of this post. We use lids that come with helium drives. Did not see any problem, we wrote before they can work with out helium. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |