HDD GURU FORUMS

Greetings, colleagues!

We’ve just expanded our toolkit with a brand-new head replacement set for Seagate 3.5" helium hard drives, supporting models with up to 8 and 9 platters.
Supported Seagate families: Evans and Evans BP. This tool is designed to simplify complex recovery jobs, providing better precision and control during the process. It’s a game-changer for anyone dealing with helium-filled drives!

If you’re interested in more details or have any questions, don’t hesitate to get in touch.

Best regards,
HDDSurgery team

We are presenting a video guide for the HDDSurgery Sea 3.5" Helium P8/P9 Ramp Set.
https://www.youtube.com/watch?v=FEWNaO_nmh4

This advanced tool set is designed for precise and reliable head replacement on Seagate helium-filled hard drives. It supports the following families: Evans, Evans BP and Mobula.

If you have any questions or suggestions, feel free to reach out. We’re here to help!

Best regards,
HDDSurgery team

I notice that the casting has tapped holes for a screw-on lid. Is the same casting used for the lower capacity air models? Do you use these "air lids" when repairing your helium drives?

It is not topic of this post. We use lids that come with helium drives.
Did not see any problem, we wrote before they can work with out helium.