| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Compatible donor http://forum.hddguru.com/viewtopic.php?f=26&t=44893 |
Page 1 of 1 |
| Author: | DDSM [ November 27th, 2024, 6:24 ] |
| Post subject: | Compatible donor |
Hello everybody, I need to replace the reading head of a Hitachi model: 0F10383JPT3MA0C0B and I would need your help to find out if the P/N and MLC need to be the same? Or what exactly needs to match to be a donor? Thank you very much to anyone who can help |
|
| Author: | skinbob [ November 27th, 2024, 7:08 ] |
| Post subject: | Re: Compatible donor |
Hitachi/IBM Use the following criteria to find a donor drive. Model number: Match the model number exactly. Part number: Match the part number exactly. Heads map: Match the physical heads (PH) map exactly. It is OK if the donor has more heads than the original drive, but all heads before that should match. MLC: Match the MLC exactly. Date of manufacture: Should be within three months — the closer the better. Taken from: https://www.donordrives.com/blog/matchi ... itachi-ibm |
|
| Author: | DDSM [ November 27th, 2024, 7:53 ] |
| Post subject: | Re: Compatible donor |
Thank you very much skinbob. Are there no exeptions in PN and MLC possible? I have seen in some other manufactures models that donordrives recommendation sometimes is a little too narrow. |
|
| Author: | DDSM [ November 27th, 2024, 8:09 ] |
| Post subject: | Re: Compatible donor |
DDSM wrote: Hello everybody,
I need to replace the reading head of a Hitachi model: 0F10383JPT3MA0C0B and I would need your help to find out if the P/N and MLC need to be the same? Or what exactly needs to match to be a donor? Thank you very much to anyone who can help |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|