Page 1 of 1

unidentified bytes in the SA

Posted: December 27th, 2016, 14:19
by alemmat
Hello everybody how are you?

I am working with a pendrive, the controller is a tc58n6629g6f. I can identify service area in the memory and i have LPN and the ECC but i cant identify 3 bytes after the LPN. These bytes are the same within page.

The page size is 17664 and page structure is

(1024 bytes data area + 1 byte LPN + 3 bytes unidentified + 70 bytes ECC) * 16

and the last 96 bytes of each page is fillid with FF

My best regards and happy holidays

Re: unidentified bytes in the SA

Posted: December 27th, 2016, 16:52
by arvika
For this controller there is no LBN in SA. SA looks partially XORed. Probably if you apply XOR to SA part it will be cleaned.

Re: unidentified bytes in the SA

Posted: December 28th, 2016, 10:05
by alemmat
Hello Arvika thanks to answer

Re: unidentified bytes in the SA

Posted: December 28th, 2016, 10:59
by Amarbir[CDR-Labs]
alemmat wrote:Hello Arvika thanks to answer


Hi,
are you new to flash like me ,Might be you can ask shasha for assistance .I Do Not Have Rusolut Though Only PC3K Flash