All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: CE Pads And Memory Config Selection
PostPosted: April 23rd, 2020, 12:43 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3464
Location: CDRLabs @ Chandigarh [ India ]
Hello,
I was Watching Erkins Youtube Video -> https://youtu.be/6wRxM5_JYEA .In This Two Different Pads Are Connected To CE0 and then in the end when he pressed the read id button and went to select memory config ,He selected the middle one and not the first and end one ,how does one come to know about planes ,crystals in this kinda situation ?

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: CE Pads And Memory Config Selection
PostPosted: April 25th, 2020, 1:23 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3844
Location: Adelaide, Australia
I wont be the bottom one "MicroSD" because you can see when ID is checked there is more than one crystal, and MicroSD config is only one. I am not sure what the top one is. The joining of the CE1 could be like the "Join CE" option in FE' NAND Reader. At a guess I would say this comes from experience. Maybe previous recoveries wired the normal way only showed 2 crystals, and experimentation found this current method.


Top
 Profile  
 
 Post subject: Re: CE Pads And Memory Config Selection
PostPosted: April 25th, 2020, 2:31 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3464
Location: CDRLabs @ Chandigarh [ India ]
HaQue wrote:
I wont be the bottom one "MicroSD" because you can see when ID is checked there is more than one crystal, and MicroSD config is only one. I am not sure what the top one is. The joining of the CE1 could be like the "Join CE" option in FE' NAND Reader. At a guess I would say this comes from experience. Maybe previous recoveries wired the normal way only showed 2 crystals, and experimentation found this current method.


Well,
Only He can answer this ,I will try and speak to him,Hope you are safe and sound

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: CE Pads And Memory Config Selection
PostPosted: April 25th, 2020, 3:28 
Offline
User avatar

Joined: September 16th, 2015, 9:06
Posts: 258
Location: Poland
Might be that this is just wrong soldering. There's no info that it worked and the data was recovered. As we can se in 1:05 it's 13x3 pinout with 4 more pins used(my guess would be VCC,VSS, CE2,CE3). If you have time, check where does the additional cable come from. Also you can check if VNR would detect ID if you connect two CE together.
Best way would be to ask the owner of this video or get a similar card and check it.

_________________
odzyskiwanie danych


Top
 Profile  
 
 Post subject: Re: CE Pads And Memory Config Selection
PostPosted: April 25th, 2020, 5:25 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3464
Location: CDRLabs @ Chandigarh [ India ]
melvin wrote:
Might be that this is just wrong soldering. There's no info that it worked and the data was recovered. As we can se in 1:05 it's 13x3 pinout with 4 more pins used(my guess would be VCC,VSS, CE2,CE3). If you have time, check where does the additional cable come from. Also you can check if VNR would detect ID if you connect two CE together.
Best way would be to ask the owner of this video or get a similar card and check it.


Hello ,
Thank You

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: CE Pads And Memory Config Selection
PostPosted: April 25th, 2020, 22:29 
Offline
User avatar

Joined: July 8th, 2019, 12:27
Posts: 147
Location: 中国大陆浙江省湖州市
We usually deal with a part of SanDisk like this

_________________
Auxiliary Tool Used For MonoLith Data Recovery, featuring the industry's most extensive Monolith pinouts
http://flash-matrix.com/


Top
 Profile  
 
 Post subject: Re: CE Pads And Memory Config Selection
PostPosted: April 26th, 2020, 2:25 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3464
Location: CDRLabs @ Chandigarh [ India ]
csava wrote:
We usually deal with a part of SanDisk like this


Hello ,
Can You Please Explain In Details Please :)

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group