All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Toshiba mSD 8GGB 98DE9892
PostPosted: April 3rd, 2022, 23:50 
Offline
User avatar

Joined: September 16th, 2015, 9:06
Posts: 258
Location: Poland
Hi, got this mSD 8GB that i'm stuck with. Dump looks quite good when i see SA but ECC i found gets me this strange pattern. Like 2 blocks are bad one good etc. It looks like dynamic XOR but i'm stuck on dump correction.
Does anyone have a clue what might be wrong here?
It's a 98DE989272D7 DDR.


Attachments:
Bez tytułu.png
Bez tytułu.png [ 317.14 KiB | Viewed 11691 times ]

_________________
odzyskiwanie danych
Top
 Profile  
 
 Post subject: Re: Toshiba mSD 8GGB 98DE9892
PostPosted: April 4th, 2022, 2:13 
Online

Joined: October 24th, 2009, 15:22
Posts: 872
Location: Poland
Bad dump quality. Use RR.

_________________
Flash Killer - everyday new resources (pinout, XOR, ECC,config) for flash devices


Top
 Profile  
 
 Post subject: Re: Toshiba mSD 8GGB 98DE9892
PostPosted: April 4th, 2022, 2:55 
Offline
User avatar

Joined: September 16th, 2015, 9:06
Posts: 258
Location: Poland
No RR works here. Nor in PC3k, FE or VNR.
Best RR was in FE but when constant read green blocks are random.
In VNR as usual - it doesn't work

_________________
odzyskiwanie danych


Top
 Profile  
 
 Post subject: Re: Toshiba mSD 8GGB 98DE9892
PostPosted: April 4th, 2022, 3:40 
Online

Joined: October 24th, 2009, 15:22
Posts: 872
Location: Poland
You can send me 10 blocks, I will check.

_________________
Flash Killer - everyday new resources (pinout, XOR, ECC,config) for flash devices


Top
 Profile  
 
 Post subject: Re: Toshiba mSD 8GGB 98DE9892
PostPosted: April 4th, 2022, 4:49 
Offline
User avatar

Joined: September 16th, 2015, 9:06
Posts: 258
Location: Poland
arvika wrote:
You can send me 10 blocks, I will check.

Done.

_________________
odzyskiwanie danych


Top
 Profile  
 
 Post subject: Re: Toshiba mSD 8GGB 98DE9892
PostPosted: April 4th, 2022, 6:25 
Online

Joined: October 24th, 2009, 15:22
Posts: 872
Location: Poland
Look on the screens.

At VNR you can see bit errors on XOR block (random "dots" at regullar pattern).
At FE you can see bit errors after apply XOR.

It is bad dump quality and RR should help. This ID usually is very easy to correct. Try find problem why RR not work.


Attachments:
SGData_1.jpg
SGData_1.jpg [ 234.6 KiB | Viewed 11634 times ]
SGData_2.jpg
SGData_2.jpg [ 179.93 KiB | Viewed 11634 times ]

_________________
Flash Killer - everyday new resources (pinout, XOR, ECC,config) for flash devices
Top
 Profile  
 
 Post subject: Re: Toshiba mSD 8GGB 98DE9892
PostPosted: April 4th, 2022, 7:18 
Online

Joined: October 24th, 2009, 15:22
Posts: 872
Location: Poland
Try play with voltage. Or set slow reading. Usually help.

_________________
Flash Killer - everyday new resources (pinout, XOR, ECC,config) for flash devices


Top
 Profile  
 
 Post subject: Re: Toshiba mSD 8GGB 98DE9892
PostPosted: April 4th, 2022, 8:19 
Offline
User avatar

Joined: September 16th, 2015, 9:06
Posts: 258
Location: Poland
Tried that too. VNR just says RR not found(RR10 used) or that it's found but doesn't work - when i stop and start it looses ID. Generaly, when i use RR in VNR it doesn't work.

_________________
odzyskiwanie danych


Top
 Profile  
 
 Post subject: Re: Toshiba mSD 8GGB 98DE9892
PostPosted: April 4th, 2022, 8:52 
Online

Joined: October 24th, 2009, 15:22
Posts: 872
Location: Poland
You can prepare remote access with ammyy. Connect chip to FE reader first. Send photo how chip is connected (reader-adapter).

_________________
Flash Killer - everyday new resources (pinout, XOR, ECC,config) for flash devices


Top
 Profile  
 
 Post subject: Re: Toshiba mSD 8GGB 98DE9892
PostPosted: May 4th, 2022, 2:33 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3464
Location: CDRLabs @ Chandigarh [ India ]
melvin wrote:
Tried that too. VNR just says RR not found(RR10 used) or that it's found but doesn't work - when i stop and start it looses ID. Generaly, when i use RR in VNR it doesn't work.


Hello ,
In VNR you can select sections were you want RR to be analysed ,Have you tried this please .

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group