HDD GURU FORUMS

Hello ,
Not Sure If This is Yet Another Rusolut Adapter Error ,But This is a NAND ID I am Getting

New NAND ID " 45489AB37E6B081E "

Why don't you solder them and check?

ID is fine. Stop blaming everything on adapters. They are just making your life easier.

It's mostly here:

https://ripitapart.com/tag/45-48-9a-b3/

melvin wrote:Why don't you solder them and check?

ID is fine. Stop blaming everything on adapters. They are just making your life easier.

Nice ,
If ID is fine ,i have raised a ticket ,This is a new ID not in database ,i used a config that i think should be it and read a chip U5 , now i am eccing it .Yes i have a defective lot of all adapters ,I am convinced i have em ,More on the adapter part later on ,in a different post .I have two WD Green SSD Cases To handle lets see how it goes .

fzabkar wrote:It's mostly here:

https://ripitapart.com/tag/45-48-9a-b3/

Hi,
After 0x7E i Have 0x6B ,And according to your link Last 2 Bytes is no information in datasheet ,Buttttttt in my case its 0x08 0x1E

ID is correct. Block = 1152 pages.

arvika wrote:ID is correct. Block = 1152 pages.

Hi Michael ,
Can you please share a screenshot of the config in VNR Please

Updating Thread ,
The M.2 SATA i have for another case is also Same ID , For Rusolut Guys This ID is Fairly " IN USE "

PS : Atleast in India

Guys ,
This Was the Config ....

Hello, I have same SSD with this chip ID. Is there a solution for this case? Thank you