@Sasha:
Of course, it is a better approach if you can selectively read slc blocks, it takes somewhat less time...
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| VNR V9 http://forum.hddguru.com/viewtopic.php?f=27&t=44790 |
Page 1 of 1 |
| Author: | pcimage [ October 30th, 2024, 6:15 ] |
| Post subject: | VNR V9 |
Hi guys, Just a quick note to say how impressed I am with the latest Sandisk/WD 20-82-00469-2 support in this version. The added support of reading the SLC portion of memory in the chips make SO much difference, I have "re-visited" some old cases completed with FE and older version of VNR and the difference is very significant indeed. I should say that I have not been asked by Rusolut to post this, I just thought I'd share my opinion and credit where credit's due!! |
|
| Author: | digisupport [ October 31st, 2024, 14:51 ] |
| Post subject: | Re: VNR V9 |
Can only agree to that - "reading SLC blocks" is really a gamechanger in some cases. |
|
| Author: | pepe [ November 2nd, 2024, 17:09 ] |
| Post subject: | Re: VNR V9 |
IDK guys, but i was able to do that with the old version as well. I had to read the chip in both modes though and assemble based on marker... |
|
| Author: | Sasha Sheremetov [ November 4th, 2024, 17:23 ] |
| Post subject: | Re: VNR V9 |
Thanks so much guys, such a feedback from top pros means a lot!! Pepe, agree, we'd also do it this way from time to time, but I and my colleagues hated it every single time, esp. on the large devices. |
|
| Author: | pepe [ November 4th, 2024, 17:37 ] |
| Post subject: | Re: VNR V9 |
@Sasha: Of course, it is a better approach if you can selectively read slc blocks, it takes somewhat less time...
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|