May 4th, 2015, 23:53
Amarbir wrote:fzabkar wrote:I notice that the P5Nsli BIOS has several overclocking settings for PCIE and CPU. Maybe the system would stabilise if one were to select the least aggressive settings?
http://dlcdnet.asus.com/pub/ASUS/mb/soc ... p5nsli.pdf
Respected Frank ,
i have not used any :D .My overclocking days are over ,But if you get the itch someday i will compete with you on the lighter note lol :mrgreen:
May 5th, 2015, 0:24
Spildit wrote:This is crazy !!!!
People can't use the on-line version because ... the server is down ? So if i pay for some time of use and the server goes down ... i can't use the tool that i've paid for ? What if MRTLab "disapear" from one day to another ?
I've used some PC-3000 UDMA units and there were no problems like this, (ok, they don't have on-line versions and they don't use the internet unless you change the card to another machine) on PC-3000 UDMA if you force the app to close for some reason, like using CRTL+ALT+DEL when you open the app again you don't have to re-install the software.
I've used my HRT card on 4 different machines so far, from P4 to dual core and even on machines that are not that powerfull i never got a single crash so far (unless i do something really stupid like attempting to read the buffer on a data request when i have to send data instead). On those cases the app closes itself but i open it again and runs normally withour re-installing anything at all.
Well, one of the things that i really like on the SD tools and on the BVG HRT tool is that the license activation is done on the HARDWARE and there is no lock to the machine.
If you move a PC-3000 card from a machine to another you have to re-activate it. Sediv products the same, and you have limitations on activation. MRT as well.
One good thing about SD is that once you activate your device the device itself stays active and you can use it on any machne you like. Same for HRT, you activate the tools on your card and if you want you can move the card (and you just have to install the drivers) and it will work ....
My problem with things like PC-3000 and MRT license is that if one day they go off-line and no longer exist and you need to move your card to another mavhine ... you are in really big trouble ...
And again, MRT is NOT a $500 usd pc-3000 clone.
For a $3000 USD tool you would expect some more reliability .... And at least to be able to use the tool even if it have some bugs ...
Now if the cards start acting like this and MRT doesn't respond quickly and even so start banning people from the forum who complain .... I really would by no recommend for people NOT TO BUY the tool untill this mess is sorted out.
There are still alternatives like Atola, DFL, F.L.A.M.E., etc ..
For a cheap GOOD alternative SeDiv is good too.
May 5th, 2015, 0:26
emad11111 wrote:1- dwinload the file
http://info.mrtlab.com/download/simsun.rar
2-Extracting file
3-Copy the file (simsun.ttc) to C:\WINDOWS\Fonts
If the problem is not solved Send me your your mail and will communicate with you to resolve the problem
May 5th, 2015, 6:32
fzabkar wrote:you need to power off completely and then wait for a while. After capacitor fully discharged,
May 5th, 2015, 7:35
jermy wrote:fzabkar wrote:you need to power off completely and then wait for a while. After capacitor fully discharged,
how does the capacitors get discharge ?
May 5th, 2015, 8:31
jermy wrote:fzabkar wrote:you need to power off completely and then wait for a while. After capacitor fully discharged,
how does the capacitors get discharge ?
May 5th, 2015, 9:13
May 5th, 2015, 10:18
LarrySabo wrote:jermy wrote:fzabkar wrote:you need to power off completely and then wait for a while. After capacitor fully discharged,
how does the capacitors get discharge ?
The fastest way is usually by pressing the PC's Power On button with power disconnected. If you don't do that, you need to wait for the capacitor charge to deplete though whatever loads exist on that power rail.
May 5th, 2015, 12:49
May 5th, 2015, 12:53
LarrySabo wrote:@Amarbit: Life's fine, thanks.
I was referring to depleting the charge on the PC motherboard, as they suggested in point 1 of the article fzabkar cited (Installation Process of MRT Pro - Troubleshooting: http://en.mrtlab.com/installation-proce ... leshooting). If the MRT card has its own 5v standby supply, why do they suggest doing this? Probably because the software is crappy and the motherboard is in an unstable state as a result, so the motherboard needs to be "reset." That's most conveniently done by removing power to the PC and pressing the PC power on/off button.
I had been wondering if I should get an MRT Pro card but your experience has cured me of that thought. Thanks!
May 5th, 2015, 14:14
May 5th, 2015, 21:40
omi786 wrote:yes, i will write them seriously about all the issues now. btw i usually get reply from them in 2-3 days max.
May 6th, 2015, 14:59
May 7th, 2015, 4:14
omi786 wrote:Haha, not that much english. I am from your neighbouring country Amarbir
May 7th, 2015, 9:42
Amarbir wrote:omi786 wrote:Haha, not that much english. I am from your neighbouring country Amarbir
Well,
Pakistan IMHO right ? .
May 7th, 2015, 10:06
omi786 wrote:Amarbir wrote:omi786 wrote:Haha, not that much english. I am from your neighbouring country Amarbir
Well,
Pakistan IMHO right ? .
yup. I am from Pakistan.
May 8th, 2015, 1:26
May 8th, 2015, 3:13
May 8th, 2015, 5:43
Amarbir wrote:Hello ,
I would like to inform the Reps of MRT that i wanted to write this in the forums so that they could understand how much hassel a customer and a potential reseller is going through .To my horror what i tried logging to the MRT forums i got this message .
PS : I have done not even a single thing to invoke a forum ban .Infact i have always helped and suggested people to the best of my ability .So can the MRT Rep here let me what on earth is going on ? .
Case Background :
I had purchased 3 MRT Pro cards in the month of jan 2015 .2 were to be used in my lab and one i had purchased after discussing with the MRT India distributor For Selling To my clients or students .
Problem :
The 2 MRT Pro cards i had installed in my lab use the same Motherboard " Asus P5nsli " .1 of the cards work properly ,but the other card Was always giving me The following error "Init Device Fail " .
Sometimes it would work and sometimes i used to get this message .I use to take the card out insert it again ,clean the contacts and what not .Sometimes it used to magically start working .Slowly the problem became so much that i had to take the support of the Indian Distributor who arranged a remote session with the MRT Engineers and the final conclusion was that it was defective so it was suggested that i have the card replaced .As i had the 3rd card with me i requested the MRT indian distributor to " Activate that in lieu of the defective one " .This was done but to my horror i was getting the same issues with that card too .So i discussed this with the Indian Distributor to which i was told i have a hardware issue and my motherboard should be defective or incompatible .Incompatibility should not be a issue as i had the 1st card working in the same board " brand and model " . So i started to hunt for a board and found the same brand / model in one of my older systems .I tested that board for a week for any potential issues and i found none and i finally swapped the " So called defective board " . To my horror again same issue " init device error " . So i took the 1st card " that was working and transferred it to the swapped board computer and voila it works " . I also tried the same card with the so called defective board and it works there two .Hence this clearly means i now have 2 defective cards + 1 working one .I would like to ask the following to the Reps of this company
1 : Why is my forum account banned [ Are you people in your senses ]
2 : I have 2 defective cards in hand [ Help me solve this issue or take back all 3 of my cards [ Refund Me My Money ] + 3 months activation fee ] .My Next Monthly Activation is Due on 9-5-2015 .
3 : Do not do this kinda thing with people.Its Mentally Very Stressing .At My Age of 40 this kinda thing gets even worse .
4 : Test your Hardware properly before giving it to people .Learn something from acelabs .
PS : I know some of my older friends would say Amarbir Are you in your senses why did you Buy this .Well the Answer is that i am saying for 1 unit of pc3000 but till then workload was increasing and i wanted something desperately .DFL is too expensive IMHO for that they offer .Damn i am frustrated raise to the power infinity lol
May 10th, 2015, 22:13
microsoftengineer wrote:very slow & bad Technical support
Card have issues also only 1 port will work ATA0 ATA1 just for show.(it works few days then stops)
Powered by phpBB © phpBB Group.