ST1000LM035-1RK172 FW EB01 ( unlock )

[marcuscercal]

Hello guys, im trying unlock this one to solve MCMT table is corrupted, following the MRT video for EB01 instructions and using the ressources provided by MRT ( http://en.mrtlab.com/st-2-1-4-x-advance ... b01-unlock ). After the process, the HDD comes to ready status, but after the commands, the folloying message appears in the terminal :

Overlay PartNum: 01222023
CFW PartNum: 10110154
Overlay CompileDate: 20190122
CFW CompileDate: 20181011

OverlayCompatibilityCheck failed

Unable to load Diag Cmd Processor Overlay


BTW, The HDD info:
ST1000LM035-1RK172-EB01-ZDExxx
DOM 03JUL2019

MRT SW ver 2.1.4.1

I guess the resource provided by MRT is not valid for this particular Janus ( following the 3 first digits in the serial number ). Anyone here have more resources for unlock this one? Im not finding any firmware resource for this HDD, mainly the loader 3D for MRT.

Regards.

[pepe]

can you upload ovls to it ? I don't know MRT at all but if it suplies a 3D (20D) loader it should supply ovls for it as well...
pepe

[marcuscercal]

can you upload ovls to it ? I don't know MRT at all but if it suplies a 3D (20D) loader it should supply ovls for it as well...
pepe

Hello Pepe,

Attached you can find the MRT Rom and 3D. The customer ROM is also available.

Thanks.

Marcus

Attachments

Unlocked EB01 Resources.rar

(1.84 MiB) Downloaded 1157 times

[vx1]

Try this:


ST1000LM035-1RK172-EB01-ZDE

[marcuscercal]

Try this:


ST1000LM035-1RK172-EB01-ZDE

Hi vx1,

I will try it, thanks.

Regards.

Marcus

[marcuscercal]

Try this:


ST1000LM035-1RK172-EB01-ZDE

It's not working in this one, but thanks.

Any one can help ?

Best regards.

Marcus

[fzabkar]

The overlays in the "F3-AF-EB01LDR.lod" file in your "Unlocked EB01 Resources.rar" attachment have a compilation date of 20181011, but this doesn't match the "Overlay CompileDate" in your terminal log.

Code:

Offset(h) 00   02   04   06   08   0A   0C   0E

000001C0  7178 3707 0000 0000 00AF 0001 0400 4A00  qx7......¯....J.
000001D0  0000 0300 1F21 0400 1110 5401 1011 1820  .....!....T....
                                        ^^^^^^^^^
000001E0  0000 0000 4000 0300 0000 0000 0000 0000  ....@...........
000001F0  0000 0000 0000 0000 0000 0000 0000 146C  ...............l

[marcuscercal]

Hello guy's,

It's done, Thanks for support and help.

Regards