All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: ST500DM002-1BD142 3F Pharaoh (DOS)CMP Count ,(DOS)STE OGHT
PostPosted: January 20th, 2023, 5:00 
Offline
User avatar

Joined: January 20th, 2021, 0:27
Posts: 75
Location: Indonesia
Hi,

I never seen this kind of problem on ST500DM002-1BD142 3F Pharaoh, 7200.12.

Below works fine/OK :
> SA, Hdd is Ready, no clicking, spindle spin normal, user area check end to end, terminal accessible.

But :
> Initially hdd detected by pc very slow.
> LBA Scan, 25% first LBA is response to yellow/delay, the rest 75% is normal.

Terminal displayed at first initial:

(DOS)STE OGHT: 0x001F546E - 0x001F65CB - 0x00000C47 - 0x00000C5B Count 0055
(DOS)CMP Count 0055
(DOS)STE OGHT: 0x00201624 - 0x002020D3 - 0x00000C47 - 0x00000C5B Count 0055
(DOS)CMP Count 0055

Hours Google, nobody talk about this.

Just try to MRT DE, first scan, stuck yellow/delay, but next scan it can finished wirh completed green till finished, unfortunately I can not open the file as none of partition appear.

Thanks for help


Top
 Profile  
 
 Post subject: Re: ST500DM002-1BD142 3F Pharaoh (DOS)CMP Count ,(DOS)STE OG
PostPosted: January 20th, 2023, 7:49 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4301
Location: Hungary
if you were able to clone the user area, check the data manually in hex editor, try to identify metadata (FS type, important FS objects) or scan with some logical recovery tool.
I would certainly start off with checking it manually.
try running a raw scan to see if there are any file headers.
That DOS message is not an error i think.
pepe

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: ST500DM002-1BD142 3F Pharaoh (DOS)CMP Count ,(DOS)STE OG
PostPosted: January 20th, 2023, 17:53 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1625
Location: Italy
Have you try the AFH option ?
In some case it will help to read better when heads can't read well in some zones.

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
 Post subject: Re: ST500DM002-1BD142 3F Pharaoh (DOS)CMP Count ,(DOS)STE OG
PostPosted: January 21st, 2023, 1:54 
Offline
User avatar

Joined: January 20th, 2021, 0:27
Posts: 75
Location: Indonesia
pepe, Spildit, michael chiklis ,

I will proceed your suggestion, I will get back which one is works.

Thanks for reply.


Top
 Profile  
 
 Post subject: Re: ST500DM002-1BD142 3F Pharaoh (DOS)CMP Count ,(DOS)STE OG
PostPosted: January 23rd, 2023, 1:03 
Offline
User avatar

Joined: January 20th, 2021, 0:27
Posts: 75
Location: Indonesia
pepe, Spildit, michael chiklis

First chance, I proceed suggestion from michael chiklis, and it works. [SOLVED]
I am not yet proceed what suggestion from pepe and Spildit.

What I am done on MRT 2.1.6.1
Tools > Disk Repair Tools > Identify Area Adaptive Parameter

I follow what exactly MRT video guide :
https://www.youtube.com/watch?v=-Fb1cQM-tKc

DE about 95%, some area initially bad sectors, I ignore these area as most data is recovered.
In my case AFH option is working well.

Thank you for All.


Top
 Profile  
 
 Post subject: Re: ST500DM002-1BD142 3F Pharaoh (DOS)CMP Count ,(DOS)STE OG
PostPosted: January 23rd, 2023, 17:46 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1625
Location: Italy
Nice :)

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group