Head 0 - OK
Head 1 - OK
Head 2 - Ok
Head 3 - OK
While making Image made image with Head 1,2,3
Next made with Head 0 - error reading many sectors.
(see the Attach screen)
Any Help or suggestion "FAILED TO READ" Sector's
LOG:
Technology mode key : ..........................: OK
RAM:
Read HDD Info : ................................: OK
Heads number : .................................: 4
Head map : .....................................: F
SA Cyl Count : .................................: 256
Serials Mark : .................................: 0xD316
Control version : ..............................: 63B0
Zone allocation table : ........................: OK
SA SPT : .......................................: 899
ROM:
Read Rom Infos : ...............................: OK
ROM Data Size : ................................: 256 Kb
ROM version : ..................................: 14.DHQ
ROM generation : ...............................: 14.DHQ
Link table version : ...........................: 05.CP
ROM Firmware version : .........................: 001400DH
ROM Modules:
Flash ROM dir reading : ........................: OK
Switched off heads : ...........................: Yes
Heads number : .................................: 0x4
Heads number in use : ..........................: 0x4
heads map : ....................................: 0,1,2,3
Load SA translator : ...........................: OK
SA Module Dir Loading...
Load SA Module dir : ...........................: OK
Configuration reading : ........................: OK
Master Password : ..............................: has not been set
User Password : ................................: has not been set
BTW : Translator Generation done : successfully.
Thanks in Advance for help/suggestion.
| Attachments: |
|
MRT-WD-Head0-reading-problem.png [ 94.33 KiB | Viewed 8925 times ] |