All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: WDC WD5000BEVT-60A0RT0 - 500 GB SATA
PostPosted: October 9th, 2020, 2:05 
Offline

Joined: July 10th, 2020, 7:34
Posts: 51
Location: India
Head 0 - OK
Head 1 - OK
Head 2 - Ok
Head 3 - OK

While making Image made image with Head 1,2,3
Next made with Head 0 - error reading many sectors.
(see the Attach screen)

Any Help or suggestion "FAILED TO READ" Sector's

LOG:
Technology mode key : ..........................: OK

RAM:
Read HDD Info : ................................: OK
Heads number : .................................: 4
Head map : .....................................: F
SA Cyl Count : .................................: 256
Serials Mark : .................................: 0xD316
Control version : ..............................: 63B0

Zone allocation table : ........................: OK
SA SPT : .......................................: 899

ROM:
Read Rom Infos : ...............................: OK
ROM Data Size : ................................: 256 Kb
ROM version : ..................................: 14.DHQ
ROM generation : ...............................: 14.DHQ
Link table version : ...........................: 05.CP
ROM Firmware version : .........................: 001400DH

ROM Modules:
Flash ROM dir reading : ........................: OK
Switched off heads : ...........................: Yes
Heads number : .................................: 0x4
Heads number in use : ..........................: 0x4
heads map : ....................................: 0,1,2,3

Load SA translator : ...........................: OK

SA Module Dir Loading...
Load SA Module dir : ...........................: OK
Configuration reading : ........................: OK
Master Password : ..............................: has not been set
User Password : ................................: has not been set

BTW : Translator Generation done : successfully.

Thanks in Advance for help/suggestion.


Attachments:
MRT-WD-Head0-reading-problem.png
MRT-WD-Head0-reading-problem.png [ 94.33 KiB | Viewed 8794 times ]
Top
 Profile  
 
 Post subject: Re: WDC WD5000BEVT-60A0RT0 - 500 GB SATA
PostPosted: October 9th, 2020, 4:00 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4311
Location: Hungary
It looks like you are shooting in the dark... Why on earth you regenerated the translator if the drive was reading UA?
Anyway, H0 is apparently weak, MHA needs to be replaced.

pepe

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: WDC WD5000BEVT-60A0RT0 - 500 GB SATA
PostPosted: October 9th, 2020, 11:26 
Offline

Joined: July 10th, 2020, 7:34
Posts: 51
Location: India
thanks for the reply.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group