HDD GURU FORUMS
http://forum.hddguru.com/

Slow jumping on bads while WD decryption is on and low timin
http://forum.hddguru.com/viewtopic.php?f=28&t=40860		 Page 1 of 1
Author:  michael chiklis [ January 21st, 2021, 4:58 ]
Post subject:  Slow jumping on bads while WD decryption is on and low timin
Impossible to jump bad sectors quickly when cloning WD drives while on fly decryption is turned on.
If i change timing settings to minimum i still get black squares and still slow reading.

The only way to jump bad sectors quickly is reading without decryption on.
I talked to MRT staff on skype and shown the videos, but they didn't understand.

As we all know, for example, they haven't understood yet the long path bug!

Attachment:
slow bads jumping.jpg
slow bads jumping.jpg [ 805.58 KiB | Viewed 17378 times ]


https://youtu.be/QfvnMKlYvKc

https://youtu.be/Q5pSD4HW458
Author:  michael chiklis [ January 22nd, 2021, 10:48 ]
Post subject:  Re: Slow jumping on bads while WD decryption is on and low t
When i read through sata/UDMA/PIO mode i can jump bad sectors very fast (they get coloured by red instead black)
Author:  michael chiklis [ February 10th, 2021, 15:45 ]
Post subject:  Re: Slow jumping on bads while WD decryption is on and low t
MRT decided to release new 2.1.6.0 software full of bugs just few hours before going in holiday for 10 days :o
Are they kidding?
Author:  ccc [ February 12th, 2021, 4:31 ]
Post subject:  Re: Slow jumping on bads while WD decryption is on and low t
I can confirm that the new version can unlock the Rosewood SSHD LX015 model. It's a strange procedure compared to the old one, but it works.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/