HDD GURU FORUMS http://forum.hddguru.com/ |
|
Slow jumping on bads while WD decryption is on and low timin http://forum.hddguru.com/viewtopic.php?f=28&t=40860 |
Page 1 of 1 |
Author: | michael chiklis [ January 21st, 2021, 4:58 ] |
Post subject: | Slow jumping on bads while WD decryption is on and low timin |
Impossible to jump bad sectors quickly when cloning WD drives while on fly decryption is turned on. If i change timing settings to minimum i still get black squares and still slow reading. The only way to jump bad sectors quickly is reading without decryption on. I talked to MRT staff on skype and shown the videos, but they didn't understand. As we all know, for example, they haven't understood yet the long path bug! Attachment: https://youtu.be/QfvnMKlYvKc https://youtu.be/Q5pSD4HW458 |
Author: | michael chiklis [ January 22nd, 2021, 10:48 ] |
Post subject: | Re: Slow jumping on bads while WD decryption is on and low t |
When i read through sata/UDMA/PIO mode i can jump bad sectors very fast (they get coloured by red instead black) |
Author: | michael chiklis [ February 10th, 2021, 15:45 ] |
Post subject: | Re: Slow jumping on bads while WD decryption is on and low t |
MRT decided to release new 2.1.6.0 software full of bugs just few hours before going in holiday for 10 days Are they kidding? |
Author: | ccc [ February 12th, 2021, 4:31 ] |
Post subject: | Re: Slow jumping on bads while WD decryption is on and low t |
I can confirm that the new version can unlock the Rosewood SSHD LX015 model. It's a strange procedure compared to the old one, but it works. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |