All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: about ST1000LM035-1RK172-EB01 too slow imaging at 80%
PostPosted: April 9th, 2021, 3:58 
Offline

Joined: April 9th, 2021, 3:47
Posts: 86
Location: Yemen
i was imaging ST1000LM035-1RK172-EB01 with good speed and when it reached 80% of the imaging the speed rate became to slow almost reach 1Mbps (all sectors are good) there is no issues with the them, so is there any one who can help me with this please?


Top
 Profile  
 
 Post subject: Re: about ST1000LM035-1RK172-EB01 too slow imaging at 80%
PostPosted: April 9th, 2021, 9:57 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3636
Location: Massachusetts, USA
Is it the same slow speed on either head? Or on both?

_________________
Hard Disk Drive, SSD, USB Drive and RAID Data Recovery Specialist in Massachusetts


Top
 Profile  
 
 Post subject: Re: about ST1000LM035-1RK172-EB01 too slow imaging at 80%
PostPosted: April 9th, 2021, 11:17 
Offline

Joined: April 9th, 2021, 3:47
Posts: 86
Location: Yemen
same slow speed on both


Top
 Profile  
 
 Post subject: Re: about ST1000LM035-1RK172-EB01 too slow imaging at 80%
PostPosted: April 9th, 2021, 23:03 
Offline
User avatar

Joined: January 20th, 2021, 0:27
Posts: 75
Location: Indonesia
I faced the same problem before, sector not 100% good, prove it in logical scan


Top
 Profile  
 
 Post subject: Re: about ST1000LM035-1RK172-EB01 too slow imaging at 80%
PostPosted: April 10th, 2021, 9:49 
Offline

Joined: April 9th, 2021, 3:47
Posts: 86
Location: Yemen
KangKung wrote:
I faced the same problem before, sector not 100% good, prove it in logical scan


yes you're alright, after i did logical scan i found a lot of delay sectors at the end


Attachments:
Untitled.png
Untitled.png [ 5.71 KiB | Viewed 9662 times ]
Top
 Profile  
 
 Post subject: Re: about ST1000LM035-1RK172-EB01 too slow imaging at 80%
PostPosted: April 10th, 2021, 9:51 
Offline

Joined: April 9th, 2021, 3:47
Posts: 86
Location: Yemen
is there a way to fix the delay sectors or only low format will fix them like bad sectors ?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group