Everything related to MRT tools
April 9th, 2021, 3:58
i was imaging ST1000LM035-1RK172-EB01 with good speed and when it reached 80% of the imaging the speed rate became to slow almost reach 1Mbps (all sectors are good) there is no issues with the them, so is there any one who can help me with this please?
April 9th, 2021, 9:57
Is it the same slow speed on either head? Or on both?
April 9th, 2021, 11:17
same slow speed on both
April 9th, 2021, 23:03
I faced the same problem before, sector not 100% good, prove it in logical scan
April 10th, 2021, 9:49
KangKung wrote:I faced the same problem before, sector not 100% good, prove it in logical scan
yes you're alright, after i did logical scan i found a lot of delay sectors at the end
- Attachments
-
- Untitled.png (5.71 KiB) Viewed 9866 times
April 10th, 2021, 9:51
is there a way to fix the delay sectors or only low format will fix them like bad sectors ?
Powered by phpBB © phpBB Group.