HDD GURU FORUMS
http://forum.hddguru.com/

about ST1000LM035-1RK172-EB01 too slow imaging at 80%
http://forum.hddguru.com/viewtopic.php?f=28&t=41186
Page 1 of 1

Author:  Core.iStores [ April 9th, 2021, 3:58 ]
Post subject:  about ST1000LM035-1RK172-EB01 too slow imaging at 80%

i was imaging ST1000LM035-1RK172-EB01 with good speed and when it reached 80% of the imaging the speed rate became to slow almost reach 1Mbps (all sectors are good) there is no issues with the them, so is there any one who can help me with this please?

Author:  labtech [ April 9th, 2021, 9:57 ]
Post subject:  Re: about ST1000LM035-1RK172-EB01 too slow imaging at 80%

Is it the same slow speed on either head? Or on both?

Author:  Core.iStores [ April 9th, 2021, 11:17 ]
Post subject:  Re: about ST1000LM035-1RK172-EB01 too slow imaging at 80%

same slow speed on both

Author:  KangKung [ April 9th, 2021, 23:03 ]
Post subject:  Re: about ST1000LM035-1RK172-EB01 too slow imaging at 80%

I faced the same problem before, sector not 100% good, prove it in logical scan

Author:  Core.iStores [ April 10th, 2021, 9:49 ]
Post subject:  Re: about ST1000LM035-1RK172-EB01 too slow imaging at 80%

KangKung wrote:
I faced the same problem before, sector not 100% good, prove it in logical scan


yes you're alright, after i did logical scan i found a lot of delay sectors at the end

Attachments:
Untitled.png
Untitled.png [ 5.71 KiB | Viewed 9876 times ]

Author:  Core.iStores [ April 10th, 2021, 9:51 ]
Post subject:  Re: about ST1000LM035-1RK172-EB01 too slow imaging at 80%

is there a way to fix the delay sectors or only low format will fix them like bad sectors ?

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/