WD20NMVW-11AV3S0 usb drive. Converted to sata PCB first.
accessed to drive with MRT, applied solve slow respond.
Code:
Technology mode key : ..........................: OK
RAM:
Read HDD Info : ................................: OK
Heads number : .................................: 8
Head map : .....................................: FF
SA Cyl Count : .................................: 256
Serials Mark : .................................: 0xFE16
Control version : ..............................: A5C0
Zone allocation table : ........................: OK
SA SPT : .......................................: 1480
ROM:
Read Rom Infos : ...............................: OK
ROM Data Size : ................................: 256 Kb
ROM version : ..................................: 01.0GG
ROM generation : ...............................: 01.0HG
Link table version : ...........................: 00.04
ROM Firmware version : .........................: 0001000G
ROM Modules:
Flash ROM dir reading : ........................: OK
Switched off heads : ...........................: Yes
Heads number : .................................: 0x8
Heads number in use : ..........................: 0x8
heads map : ....................................: 0,1,2,3,4,5,6,7
SA Module Dir Loading...
Load SA Module dir : ...........................: OK
Configuration reading : ........................: OK
Master Password : ..............................: has not been set
User Password : ................................: has not been set
Head 0 bad. I have imaged all other heads data fully.
User data look like encrypted. I have checked target drive in windows after clone . I saw a WD partiton end of drive
Attachment:
image_2021_04_23T01_35_08_842Z.png [ 112.09 KiB | Viewed 9962 times ]
Attachment:
image_2021_04_23T01_36_01_954Z.png [ 7.29 KiB | Viewed 9962 times ]
It is now working automaticly (autorun not runing when plug in drive)
User have user password. Tried decrypt with this password. but there is an error like this.
Attachment:
image_2021_04_21T07_49_26_337Z.png [ 103.47 KiB | Viewed 9962 times ]
USB PCB has JMS538S
Here is Mod 25 , 02
Attachment:
25.rar [1.87 KiB]
Downloaded 460 times
I have searched google. Couldn't find a solution for this case. Also MRT tecnician joined . And said its WD security password. But how could decrypt this data?
What is your advices.
I dont have same model drive in my hand. I would try to find a same model drive, and clone data to it, and try to look with patient PCB.