| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| ST31000524AS - FW:HP64 PCB:100574451 REV B - (pcb is BURNT) http://forum.hddguru.com/viewtopic.php?f=28&t=41685 |
Page 2 of 2 |
| Author: | reliableservice [ September 12th, 2021, 3:02 ] |
| Post subject: | Re: ST31000524AS - FW:HP64 PCB:100574451 REV B - (pcb is BUR |
pepe wrote: Quote: Have you tried external readers? Yes with desoldering the patient rom? YES coz you may not be able to read it in circuit if the power rail is shorted for example. soldered it to donor pcb? Yes Read it VIA MRT ROM READER pepe Let me say Again - IT IS CONFIRMED ORG ROM IS BLANK. 1. Only ROM Read via MRT ROM reader (result : Blank) 2. Putting on Donor PCB - Read via BOOT CODE (result : Blank) Is there any way to Re-build the ROM (manually or automated) ? will be the best way to get the data. |
|
| Author: | pepe [ September 14th, 2021, 5:41 ] |
| Post subject: | Re: ST31000524AS - FW:HP64 PCB:100574451 REV B - (pcb is BUR |
Quote: Is there any way to Re-build the ROM (manually or automated) ? will be the best way to get the data. yes, as i said i can do it. Just tried to exclude any other problems that might have suggested that the rom is empty while it actually isn't, before moving to the rom recovery phase. pepe |
|
| Author: | reliableservice [ September 15th, 2021, 2:33 ] |
| Post subject: | Re: ST31000524AS - FW:HP64 PCB:100574451 REV B - (pcb is BUR |
pepe wrote: Quote: Is there any way to Re-build the ROM (manually or automated) ? will be the best way to get the data. yes, as i said i can do it. Just tried to exclude any other problems that might have suggested that the rom is empty while it actually isn't, before moving to the rom recovery phase. pepe Thanks for the Reply. 
|
|
| Page 2 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|