HDD GURU FORUMS http://forum.hddguru.com/ |
|
I NEED FIRMWARE http://forum.hddguru.com/viewtopic.php?f=28&t=41686 |
Page 1 of 2 |
Author: | SALIM [ September 10th, 2021, 7:55 ] |
Post subject: | I NEED FIRMWARE |
please 8TB SEAGATE ST8000NM0045 1RL112-002 NN02 |
Author: | SALIM [ September 11th, 2021, 3:25 ] |
Post subject: | Re: I NEED FIRMWARE |
PLEASE HELP |
Author: | reliableservice [ September 12th, 2021, 3:04 ] |
Post subject: | Re: I NEED FIRMWARE |
SALIM wrote: please 8TB SEAGATE ST8000NM0045 1RL112-002 NN02 Ideally do Post with Front and Back CLEAR IMAGE of the Drive will make EASY to help you. |
Author: | SALIM [ September 14th, 2021, 3:14 ] | ||
Post subject: | Re: I NEED FIRMWARE | ||
please now
|
Author: | einstein9 [ September 14th, 2021, 5:23 ] |
Post subject: | Re: I NEED FIRMWARE |
reliableservice wrote: SALIM wrote: please 8TB SEAGATE ST8000NM0045 1RL112-002 NN02 Ideally do Post with Front and Back CLEAR IMAGE of the Drive will make EASY to help you. Am wondering how an image will help YOU here? !!! try to explain more @SALIM Seagate firmwares are unique for each drive (specially those new 8TB) posting the terminal log will explain it more ... |
Author: | SALIM [ September 18th, 2021, 2:01 ] | ||
Post subject: | Re: I NEED FIRMWARE | ||
please i think i need LDR
|
Author: | fzabkar [ September 18th, 2021, 4:01 ] |
Post subject: | Re: I NEED FIRMWARE |
This could be the result of a failed or improper firmware update. Can you upload your ROM? It may be possible to revert to a backup copy of the original firmware. |
Author: | SALIM [ September 18th, 2021, 11:30 ] | ||
Post subject: | Re: I NEED FIRMWARE | ||
to all members please
|
Author: | Lardman [ September 18th, 2021, 14:09 ] |
Post subject: | Re: I NEED FIRMWARE |
RAP and CAP are bad amongst other bits and the serial number in the SAP doesn't match the label you posted (but does match your MRT screenshot). Above my paid grade I'm afraid. |
Author: | fzabkar [ September 18th, 2021, 14:36 ] |
Post subject: | Re: I NEED FIRMWARE |
That's only half the ROM. Following up Lardman's observation ... https://www.seagate.com/au/en/support/warranty-and-replacements/ Quote: Your Product -- Exos 7E Model Number -- ST8000NM0055 SerialNumber -- ZA108ZNX Quote: Your Product -- Enterprise Capacity 3.5 Hard Drives
Model Number -- ST8000NM0045 SerialNumber -- ZA13WEXP |
Author: | Lardman [ September 18th, 2021, 14:52 ] |
Post subject: | Re: I NEED FIRMWARE |
Sloppy seconds on a fubar drive do you think? |
Author: | fzabkar [ September 18th, 2021, 15:07 ] |
Post subject: | Re: I NEED FIRMWARE |
I'm watching a thread in another forum where an ST2000VM003 drive has been relabelled as a FireCuda, and the CAP in the ROM has been hacked so that the drive reports the fake serial number. |
Author: | Lardman [ September 18th, 2021, 15:44 ] |
Post subject: | Re: I NEED FIRMWARE |
I'm following Phil's thread - I just don't see that sort of thing here or at least I don't think I do. Given how close the 2 drives in this case are I wonder if the pcb being used is original or if it's a board swap without a rom swap. SALIM have you don't anything to the drive/rom yet? |
Author: | fzabkar [ September 18th, 2021, 16:03 ] |
Post subject: | Re: I NEED FIRMWARE |
deleted |
Author: | fzabkar [ September 18th, 2021, 16:37 ] |
Post subject: | Re: I NEED FIRMWARE |
Could we see both sides of the PCB? Could we see the markings on the chips, especially the ROM? |
Author: | fzabkar [ September 18th, 2021, 22:48 ] |
Post subject: | Re: I NEED FIRMWARE |
ST8000NM0045 is a standard (non-SED) 4Kn model whereas ST8000NM0055 is a standard 512e model: EXOS Enterprise 7E8 SATA Product Manual: https://www.seagate.com/www-content/product-content/enterprise-hdd-fam/enterprise-capacity-3-5-hdd/enterprise-capacity-3-5-hdd/en-us/docs/100827319a.pdf MRT identifies the family for the ST8000NM0055 as MakaraPlus, so I'm guessing that the ST8000NM0045 is the 4Kn version of the same family. These firmware updates contain LOD files (loaders): EntCap-MakaraPlus-STD-SATA-4kN-NN04.zip https://files.hddguru.com/download/Firmware%20updates/Seagate/EntCap-MakaraPlus-STD-SATA-4kN-NN04.zip EntCap-MakaraPlus-STD-SATA-512E-SN05.zip https://files.hddguru.com/download/Firmware%20updates/Seagate/EntCap-MakaraPlus-STD-SATA-512E-SN05.zip EntCap-MakaraPlus-STD-SATA-512E-SN04.zip https://files.hddguru.com/download/Firmware%20updates/Seagate/EntCap-MakaraPlus-STD-SATA-512E-SN04.zip EntCap-MakaraPlus-STD-SATA-512E-PN04.zip https://files.hddguru.com/download/Firmware%20updates/Seagate/EntCap-MakaraPlus-STD-SATA-512E-PN04.zip |
Author: | SALIM [ September 19th, 2021, 1:20 ] |
Post subject: | Re: I NEED FIRMWARE |
thanks for all of you |
Author: | fzabkar [ September 19th, 2021, 16:41 ] | ||
Post subject: | Re: I NEED FIRMWARE | ||
MakaraPlus NN05 4Kn loader attached.
|
Author: | SALIM [ October 1st, 2021, 10:40 ] |
Post subject: | Re: I NEED FIRMWARE |
SALIM wrote: please i think i need LDR PLEASE HELP not solved |
Author: | fzabkar [ October 1st, 2021, 16:08 ] |
Post subject: | Re: I NEED FIRMWARE |
Why does your drive have two different serial numbers from two different models? Why have you only uploaded half of the ROM? Is the drive a fake? The "Overlay ..." messages in your terminal log would suggest that your drive can reach the SA, so the adaptives would seem to be native, or am I misunderstanding something? |
Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |