September 21st, 2021, 12:35
September 25th, 2021, 16:08
October 23rd, 2021, 9:05
November 2nd, 2021, 2:16
November 2nd, 2021, 10:59
November 18th, 2021, 18:55
November 18th, 2021, 20:59
November 19th, 2021, 3:05
November 19th, 2021, 19:23
lcoughey wrote:They also say that it is only supported for sata boards, not USB.
November 20th, 2021, 6:00
November 21st, 2021, 10:30
HddDonorMarket wrote:lcoughey wrote:They also say that it is only supported for sata boards, not USB.
Working on palmer
For USB>> Read Rom dump, Unlock with MRT and write directly to Rom chip or an unlocked PCB with MRT.
Tested Palmer USB and SATA working good. pcb 800069. 800066
November 22nd, 2021, 3:47
gps31 wrote:HddDonorMarket wrote:lcoughey wrote:They also say that it is only supported for sata boards, not USB.
Working on palmer
For USB>> Read Rom dump, Unlock with MRT and write directly to Rom chip or an unlocked PCB with MRT.
Tested Palmer USB and SATA working good. pcb 800069. 800066
can you post how to connect terminal to 2060-800069-001 (TX and RX) Pls
November 22nd, 2021, 10:24
HddDonorMarket wrote:lcoughey wrote:They also say that it is only supported for sata boards, not USB.
Working on palmer
For USB>> Read Rom dump, Unlock with MRT and write directly to Rom chip or an unlocked PCB with MRT.
Tested Palmer USB and SATA working good. pcb 800069. 800066
November 22nd, 2021, 15:34
lcoughey wrote:HddDonorMarket wrote:lcoughey wrote:They also say that it is only supported for sata boards, not USB.
Working on palmer
For USB>> Read Rom dump, Unlock with MRT and write directly to Rom chip or an unlocked PCB with MRT.
Tested Palmer USB and SATA working good. pcb 800069. 800066
I figured that process should work, but then you still have to have a terminal connection to handle the handshake command, I presume.
January 14th, 2022, 10:25
January 15th, 2022, 4:55
January 17th, 2022, 12:54
January 18th, 2022, 2:32
DR-Kiev wrote:Programmer has no much matter since you can desolder ROM read it using different pcb or cheap programmer, patch it as ROM file in MRT , write and solder back.
January 18th, 2022, 2:44
ccc wrote:DR-Kiev wrote:Programmer has no much matter since you can desolder ROM read it using different pcb or cheap programmer, patch it as ROM file in MRT , write and solder back.
That is the problem.......In the last version of the software, when you try to patch from file, not from programmer, it still asks for programmer to be present.
I have talked with them and they say it's a "strategy ". They prohibit use of other hardware with MRT software.....
In other words, if we want to patch from file we will need the ver 3.0 programmer. Shame on them. It's not fair.
ruivo2 wrote:MRT Unlock Rom Palmer pcb 800066
Very nice work MRT Lab!
Follow link;
https://www.youtube.com/watch?v=ncxHp4BvWKM
January 18th, 2022, 3:03
Powered by phpBB © phpBB Group.