| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Seagate ST9750420AS can not read after a while http://forum.hddguru.com/viewtopic.php?f=28&t=41809 |
Page 1 of 1 |
| Author: | Core.iStores [ October 20th, 2021, 14:27 ] | ||
| Post subject: | Seagate ST9750420AS can not read after a while | ||
every thing with this drive is good and i can backup and read everything accept when i try to do logical scan or read user data it stops reading after a little while and gives red sectors you can see in the attached photo can any when help me with this please ?
|
|||
| Author: | pepe [ October 20th, 2021, 15:35 ] |
| Post subject: | Re: Seagate ST9750420AS can not read after a while |
have you checked if the unreadable area starts at a head boundary? i suspect h1 is weak (at least) pepe |
|
| Author: | Core.iStores [ October 21st, 2021, 15:12 ] |
| Post subject: | Re: Seagate ST9750420AS can not read after a while |
pepe wrote: have you checked if the unreadable area starts at a head boundary? i suspect h1 is weak (at least) pepe the problem is that from that point till the end it gives red sectors even if i go to the end sector it gives all red |
|
| Author: | pepe [ October 21st, 2021, 17:18 ] |
| Post subject: | Re: Seagate ST9750420AS can not read after a while |
then it is probably translator related. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|