HDD GURU FORUMS

Hello friends

Small Tool developed for MRTLAB card/Tool users.


Run the tool and Read all Instruction and Details.

Thank a lot.

I think you need to be more informative than that before anyone would download that file.

lcoughey wrote:I think you need to be more informative than that before anyone would download that file.

Save the log file as RTF and use this file to filter
it removes all line with following string
succeeded!, Parse, reset, Timeout, Calculating, Duration, complete, skip

keeps other line and write back with new file name+-new

This file you can share with customer to tell what is not copied.

SORRY FOR NOT INFORMATIVE....

Thank you reliableservice, it works !

reliableservice wrote:This file you can share with customer to tell what is not copied.

plus damaged files which have bad sectors.

Is this essentially what the tool does (executed from CMD prompt)?

Code:

find /v /i "succeeded!" logfile | find /v /i "Parse" | find /v /i "reset" | find /v /i "Timeout" | find /v /i "Calculating" | find /v /i "Duration" | find /v /i "complete" | find /v /i "skip" > logfile_new

fzabkar wrote:Is this essentially what the tool does (executed from CMD prompt)?

Code:

find /v /i "succeeded!" logfile | find /v /i "Parse" | find /v /i "reset" | find /v /i "Timeout" | find /v /i "Calculating" | find /v /i "Duration" | find /v /i "complete" | find /v /i "skip" > logfile_new

Nailed ,
I knew it was coming