Page 1 of 1
HOW TO TO WORK
Posted: July 29th, 2025, 5:39
by RAJOO
hi
does MRT support this hdd
Re: HOW TO TO WORK
Posted: July 29th, 2025, 8:19
by vx1
in the upcoming 2.1.11.1 update it looks like it will be supported
English version not yet released.
https://info.mrtlab.com/download/
Re: HOW TO TO WORK
Posted: August 1st, 2025, 1:15
by ccc
The english version is out but be aware, they broke the DE part. It can't open old DE tasks. It will crash with a "Runtime error". So finish the old tasks with old version and after that do the update.
Re: HOW TO TO WORK
Posted: August 2nd, 2025, 5:18
by siamak5561
ccc wrote:The english version is out but be aware, they broke the DE part. It can't open old DE tasks. It will crash with a "Runtime error". So finish the old tasks with old version and after that do the update.
Thanks for Info.
Re: HOW TO TO WORK
Posted: August 14th, 2025, 15:32
by saltwater
There are so many bugs in DE module
Re: HOW TO TO WORK
Posted: August 15th, 2025, 2:35
by ccc
Yes, i have seen them....I have downgraded to 2.1.10 because the new version is unusable.
Re: HOW TO TO WORK
Posted: August 15th, 2025, 5:03
by michael chiklis
YEP, junk upgrade!
This is another bug about SSD virtual translator that fails!
I have contact mrt support, they say that is not a bug.
P.S.
This is how it is detect in normal mode (without safe mode)
Re: HOW TO TO WORK
Posted: August 15th, 2025, 5:19
by michael chiklis
as you can see on top left, T0929A0 is the firmware version of this drive detected by utility when ssd is not in safe mode.
The drive in normal mode is correctly detected, it goes busy as i try to enter to any sector, but smart status is accessible.
This means that the ssd is not in such bad shape as was told me by mrt tech support, so virtual translator should work.
Buggy!
Re: HOW TO TO WORK
Posted: August 15th, 2025, 8:35
by vx1