View topic - New ST31500341AS not detected in BIOS - Limit Speed

Main » Forums home » Lounge

All times are UTC - 5 hours [ DST ]

Switch to mobile style

New ST31500341AS not detected in BIOS - Limit Speed - Jumper

Page 1 of 1

[ 3 posts ]

Previous topic | Next topic

Author

Message

wiesl

Post subject: New ST31500341AS not detected in BIOS - Limit Speed - Jumper

Posted: February 20th, 2009, 13:01

Joined: February 20th, 2009, 12:54
Posts: 2
Location: Europe

Hello!

The Seagate ST31500341AS, 9JU138-302, Firmware CC1H is not detected by the BIOS (VIA VT8237, BIOS Version 4.97).
Is this a bug of the firmware (a SAMSUNG 320GB HDD with 3.0 GBit/s SATA is detected without any problems)?
Is there a jumper setting for the speed limit (1.5GBit/s) available?
I tried already tried without success:
http://www.digitalanime.com.br/sea/connector.jpg

I know that the VT8237 chipset has some limitations.

Any ideas?

Thnx.

Wiesl

Top

Doomer

Post subject: Re: New ST31500341AS not detected in BIOS - Limit Speed - Jumper

Posted: February 20th, 2009, 16:14

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago

The picture has correct settings for SATA 1.5Gb/s
There is something else prventing drive from init

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.

Top

wiesl

Post subject: Re: New ST31500341AS not detected in BIOS - Limit Speed - Jumper

Posted: February 21st, 2009, 3:53

Joined: February 20th, 2009, 12:54
Posts: 2
Location: Europe

Is this valid for any revision of the drive (9JU138-302)?

Mine hasn't any jumper settings on it, there were revision were the drive had the jumper settings on it.

Thnx
Wiesl

Top

Page 1 of 1

[ 3 posts ]

Main » Forums home » Lounge

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum